Yes,ethtool only use on physical network.But bonding sometimes have sync problem.So,I need disabled physical network autoneg function.Could solved it?
Beiträge von akong
-
-
Yes,ethtool only use on physical network.But bonding sometimes have sync problem.So,I need disabled physical network autoneg function.Could solved it?
-
Thanks a lot.
I know it's can set ethtool option.
I want set bonding.So I will delete all nic network settings and create new bonding.If I haven't delete all nic network.I can't found all nic network card when I create bonding.
So, I can't set ethtool to nic network card. -
Hello,
I have two network and want to build bonding.I can create bonding success.But my two network card can't sync on boot.So,I need disabled autoneg function on network card.
I know can add other autoneg off to network card option.But I can't set on phy network card when I create bonding.
Even I force add eth0 or eth1 and set to maunal and set autoneg off on option.This set can't write to /etc/network/interfaces this file.
I can direct edit this file and set it.But my settings will clean if I use webgui to change any network card setup.Could you know my mean? -
Hello,
How to upgrade to 2.0,use apt-get? -
Hello,
I have try update by apt-get.But I got error message.ZitatAlles anzeigenFetched 129 kB in 3s (38.1 kB/s)
Traceback (most recent call last):
File "/usr/sbin/omv-mkaptidx", line 55, in <module>
cache = apt.cache.Cache()
File "/usr/lib/python3/dist-packages/apt/cache.py", line 102, in __init__
self.open(progress)
File "/usr/lib/python3/dist-packages/apt/cache.py", line 145, in open
self._cache = apt_pkg.Cache(progress)
SystemError: E:The value 'stable' is invalid for APT::Default-Release as such a release is not available in the sources
Reading package lists... DoneI don't know what is this problem?How to fix it?
-
Hello,
I have installed OMV and OMV-extras.But I haven't see virtualhosts plugins.Is it haven't include plugins? -
I have installed OMV owncloud and edit /var/www/owncloud/config/config.php
But It's will restore default trusted domain when I enabled owncloud service.
The default trusted domain is local,but I need add 192.168.2.0 and external IP to trusted domain.How to do it? -
I upload four attachment file and please check it.
The explorer_secure.png is chinese interface.I have set everyone allow full control all folder and file. -
stat /media/71a35e15-4c1f-4e8c-a7a4-956b65a767f9/Temp/
File: `/media/71a35e15-4c1f-4e8c-a7a4-956b65a767f9/Temp/'
Size: 4096 Blocks: 8 IO Block: 4096 directory
Device: 801h/2049d Inode: 253952001 Links: 91
Access: (2777/drwxrwsrwx) Uid: ( 0/ root) Gid: ( 100/ users)
Access: 2014-11-12 10:18:08.740337913 +0800
Modify: 2014-11-12 10:18:08.000000000 +0800
Change: 2014-11-12 10:18:08.444340188 +0800
Birth: -This folder is share for all users.
-
Thanks a lot.I have edit it.Do I need run any command or what to do?
-
I have three share folder and I auth account by active directory.But the one share folder don't need auth account and everyone can access it.I have set guest allow in this share folder.But it's can't access it when I use windows client to access it.I have change to No guest and addition "Public=yes" to extra options.It's can access it by windows client.What's problem?
-
When I set public to Guest allowed.It's will set vaild users = nobody at samba share.If I only set public = yes at samba share.In addition to fill in the extra options, there are other possible settings in webgui?
-
Please see attachment.I have three ip on openmediavault.
eth0:192.168.2.221
eth1:192.168.2.222
eth2:192.168.2.223
I upload file by 192.168.2.222 ip.But the 192.168.2.222 network graph have not upload bandwidth.I found upload bandwidth is eth2(192.168.2.223)
It's can see eth2 incoming have large upload bandwidth,but eth1 no large file bandwidth.
You can see upload_file_1G.png attachment.I use \\192.168.2.222\temp.Is should show bandwidth on eth1(192.168.2.222)?
Whats wrong? -
I wish to have the opportunity to see this feature appear in openmediavault,Thanks a lot.
-
I have screenshot it.It's function is at webmin --> Samba --> Share Name --> View Connect.If I click checkbox on any user and click Disconnect select users.It's user will disconnect this share.
-
I found Cifs/Samba - Audit webpage have page limit.It's limit to 2001 page.I have check /var/log/samba/audit.log.It's log always log user action.But audit webpage will stop at 2001 page.
Please see attachment.It's can see audit_webpage.png have stop 2014/11/06 and 2001 page.But audir_logfile.png have show it's log to 2014/11/07
How to fix it? -
The webmin software can disconnect it
-
I have a suggest about samba.Could disconnect specific samba user?Some user will open file and forget to close it.It's will let another user open file will read only.Could add this function?
-
I installed OMV 1.0.29 and I also need install webmin.So I download webmin for debian and install webmin need package by apt-get.But it's will get error message when I installed webmin.
ZitatAlles anzeigenERROR:root:code for hash md5 was not found.
Traceback (most recent call last):
File "/usr/lib/python3.2/hashlib.py", line 141, in <module>
globals()[__func_name] = __get_hash(__func_name)
File "/usr/lib/python3.2/hashlib.py", line 91, in __get_builtin_constructor
raise ValueError('unsupported hash type ' + name)
ValueError: unsupported hash type md5
ERROR:root:code for hash sha1 was not found.
Traceback (most recent call last):
File "/usr/lib/python3.2/hashlib.py", line 141, in <module>
globals()[__func_name] = __get_hash(__func_name)
File "/usr/lib/python3.2/hashlib.py", line 91, in __get_builtin_constructor
raise ValueError('unsupported hash type ' + name)
ValueError: unsupported hash type sha1
ERROR:root:code for hash sha224 was not found.
Traceback (most recent call last):
File "/usr/lib/python3.2/hashlib.py", line 141, in <module>
globals()[__func_name] = __get_hash(__func_name)
File "/usr/lib/python3.2/hashlib.py", line 91, in __get_builtin_constructor
raise ValueError('unsupported hash type ' + name)
ValueError: unsupported hash type sha224
ERROR:root:code for hash sha256 was not found.
Traceback (most recent call last):
File "/usr/lib/python3.2/hashlib.py", line 141, in <module>
globals()[__func_name] = __get_hash(__func_name)
File "/usr/lib/python3.2/hashlib.py", line 91, in __get_builtin_constructor
raise ValueError('unsupported hash type ' + name)
ValueError: unsupported hash type sha256
ERROR:root:code for hash sha384 was not found.
Traceback (most recent call last):
File "/usr/lib/python3.2/hashlib.py", line 141, in <module>
globals()[__func_name] = __get_hash(__func_name)
File "/usr/lib/python3.2/hashlib.py", line 91, in __get_builtin_constructor
raise ValueError('unsupported hash type ' + name)
ValueError: unsupported hash type sha384
ERROR:root:code for hash sha512 was not found.
Traceback (most recent call last):
File "/usr/lib/python3.2/hashlib.py", line 141, in <module>
globals()[__func_name] = __get_hash(__func_name)
File "/usr/lib/python3.2/hashlib.py", line 91, in __get_builtin_constructor
raise ValueError('unsupported hash type ' + name)
ValueError: unsupported hash type sha512
Traceback (most recent call last):
File "/usr/sbin/omv-mkaptidx", line 23, in <module>
import apt
File "/usr/lib/python3/dist-packages/apt/__init__.py", line 24, in <module>
from apt.package import Package
File "/usr/lib/python3/dist-packages/apt/package.py", line 22, in <module>
import http.client
File "/usr/lib/python3.2/http/client.py", line 69, in <module>
import email.parser
File "/usr/lib/python3.2/email/parser.py", line 12, in <module>
from email.feedparser import FeedParser
File "/usr/lib/python3.2/email/feedparser.py", line 27, in <module>
from email import message
File "/usr/lib/python3.2/email/message.py", line 17, in <module>
from email import utils
File "/usr/lib/python3.2/email/utils.py", line 27, in <module>
import random
File "/usr/lib/python3.2/random.py", line 45, in <module>
from hashlib import sha512 as _sha512
ImportError: cannot import name sha512
Reading package lists... Done
I have check new install OMV.The python is used python 3.2.What is this problem and how to fix it?