Dear sir/ Madam
Recently I have downloaded OMV 2.1 from Sourceforge and installed on my hardware. For first time I had successful login in WEB GUI. But today I can not login to the web GUI with admin and "openmediavault" password. I tried to change the web password via omv-firstaid but I got an error and after reboot still cant access to web GUI.
I also studied the related issue in forum but can see anything help me.
regards
Thanks for your reply
You can find below the command output:
ii openmediavault 1.9 all open network attached storage olution
ii openmediavault-keyring 0.3 all GnuPG archive keys of the openmediavault archi
Dear Sir/Madam
I am trying to install last version of omv Kralizec via web with these code:
1 - echo "deb http://packages.openmediavault.org/public kralizec main" > /etc/apt/sources.list.d/openmediavault.list
2 - apt-get update
3 - apt-get install openmediavault-keyring postfix
4 - apt-get update
5 - apt-get install openmediavault
6 - omv-initsystem
at last step I got this error : "command not found"
how can I solve this issue? Would you please help me?
regards
Is there any iso or full package for wheezy? I have some problem with my internet speed and online update and installation.
Dear Sir/Madam
I need to download last OMV package for using on USB installation. Kralizec would be my experienced distribution (1.0)Know I use 1.6 Kralizec and have tested it several times and your guidance for downloading this version package would be my pleasure.
Regards
Yes sdb is bad one
This is a test setup I disconnected sdb and after reboot added it to NAS
Thanks for your reply
I use hardware with hot swap property. Do I need to shutdown my NAS for replace bad hard drive?
Would you please help me how can I add new hard? Do I use recovery in raid management menu?
Dear all
I have installed and upgraded my NAS software to Kralizec 1.5. It work very good. Recently I encountered a problem with one of my 2TB hard drives. I had 2* 2trabyte with raid 1 and EXT4 file system, in my NAS. I replaced my broken hard disk with a new one. Now I can see my new hard disk in Physical Disks menu. Is there any chance to return to my previous raid setup automatically or I have to do some actions to remove "clean, degraded" status?
Regards,
Please be informed that updating kernel backport to 3.2 beside installing anew fresh OMV worked for me. I I didn't replace NAND but I did all of your suggestion specially in case of updating backport via OMV-EXTRAS. I think my network card update driver via updating or something like that removed the issue.
Anyway thank again for your cooperation
Ok I'll do that but It seems that I have 75% free space on NAND.
yes I can install another hard drive on system.
please find df -h output as below:
Filesystem size Used Avial Use% Mounted on
/dev/sdc1 3.5G 740M 2.6G 23% /
tmpfs 2.0G 0 2.6G 0% /lib/init/rw
udev 2.0G 168K 2.0G 1% /dev
tmpfs 2.0G 0 2.0G 0% /dev/shm
tmpfs 2.0G 0 2.0G 0% /tmp
/dev/md127 917G 29G 889G 4% /media/8c1506de-b680-4404-9002-398cc5163df5
Also please see apt-get clean command output: Nothing happened I think because of I did that before from omv-extras plugin.
Do you recommend to install the OMV on another hard disk?
Its working now, does it indicating my NAND flash health?
I restarted my hardware and now everything is OK. but I don't know why after reboot everything return to normal? and when it will occur another time?
how can I check that? I can not access to wen GUI and any command can not run in command line.
How can I check my flash?
After updating backports I have no problem for a while but now an I can see Ext4-fs error on command line and I can not access to Web GUI (forbidden) and also my share folder is not accessible again.
I did the update via Web GUI and installed backports 3.2 kernel. Do you think the issue will remove with this update?
Any other recommendation?
Thx again
After package installation I used update manager menu and uploaded the last package update and installed them but I don't remember your mentioned update.
Where can I find this button? On web GUI?
Can you help me how can I do your mentioned update ?
this is a Samsung nand flash and I know that is used in NAS systems.
The OS in installed on 4GB internal flash of my NAS hardware.
