Beiträge von elmero

elmero · 19. November 2016

Könnte es mit einem SSH Timeout Problem zusammenhängen? Irgendwie ist da das Verhalten auch anders. Hast du dieses Verhalten bei einem Shutdown nicht?

elmero · 19. November 2016

Nachdem der Start von OMV3 habe ich diveres Ethernet Meldungen im /var/log/messages File:
Nov 19 10:02:54 OMV01 kernel: [ 17.968473] eth0: renamed from veth39c0a41
Nov 19 10:02:55 OMV01 kernel: [ 18.284446] eth0: renamed from vethbdb8a26
Nov 19 10:02:55 OMV01 kernel: [ 18.544362] eth0: renamed from vethdffdb3e
Nov 19 10:02:55 OMV01 kernel: [ 18.556291] eth0: renamed from veth414103e
Nov 19 10:02:55 OMV01 kernel: [ 18.697011] eth0: renamed from veth5b45a0d
Nov 19 10:02:55 OMV01 kernel: [ 18.768305] eth0: renamed from veth8b6f245
Nov 19 10:02:56 OMV01 kernel: [ 19.548636] eth0: renamed from vethdabfc23
Nov 19 10:02:57 OMV01 kernel: [ 20.920413] eth0: renamed from veth7a54484
Nov 19 10:02:57 OMV01 kernel: [ 20.948362] eth0: renamed from veth998e402
Nov 19 10:03:13 OMV01 kernel: [ 36.484590] veth8b6f245: renamed from eth0
Nov 19 10:03:13 OMV01 kernel: [ 36.692516] eth0: renamed from veth8b6f245
Nov 19 10:03:14 OMV01 kernel: [ 37.372366] veth8b6f245: renamed from eth0
Nov 19 10:03:14 OMV01 kernel: [ 37.492268] eth0: renamed from veth8b6f245
Nov 19 10:03:15 OMV01 kernel: [ 38.093078] veth8b6f245: renamed from eth0
Nov 19 10:03:15 OMV01 kernel: [ 38.188271] eth0: renamed from veth8b6f245
Nov 19 10:03:16 OMV01 kernel: [ 39.279890] veth8b6f245: renamed from eth0
Nov 19 10:03:16 OMV01 kernel: [ 39.416369] eth0: renamed from veth8b6f245
Nov 19 10:03:18 OMV01 kernel: [ 41.523926] veth8b6f245: renamed from eth0
Nov 19 10:03:18 OMV01 kernel: [ 41.672427] eth0: renamed from veth8b6f245
Nov 19 10:03:22 OMV01 kernel: [ 45.234870] veth8b6f245: renamed from eth0
Nov 19 10:03:22 OMV01 kernel: [ 45.493255] eth0: renamed from veth8b6f245
Nov 19 10:03:29 OMV01 kernel: [ 52.292470] veth8b6f245: renamed from eth0
Nov 19 10:03:29 OMV01 kernel: [ 52.420349] eth0: renamed from veth8b6f245
Nov 19 10:03:42 OMV01 kernel: [ 65.471953] veth8b6f245: renamed from eth0
Nov 19 10:03:43 OMV01 kernel: [ 65.572845] eth0: renamed from veth8b6f245
Nov 19 10:04:09 OMV01 kernel: [ 91.387929] veth8b6f245: renamed from eth0
Nov 19 10:04:09 OMV01 kernel: [ 91.484716] eth0: renamed from veth8b6f245
Nov 19 10:05:02 OMV01 kernel: [ 142.904403] veth8b6f245: renamed from eth0
Nov 19 10:05:02 OMV01 kernel: [ 142.992461] eth0: renamed from veth8b6f245
Nov 19 10:06:46 OMV01 kernel: [ 245.615415] veth8b6f245: renamed from eth0
Nov 19 10:06:46 OMV01 kernel: [ 245.700717] eth0: renamed from veth8b6f245
Nov 19 10:10:12 OMV01 kernel: [ 450.808259] veth8b6f245: renamed from eth0
Nov 19 10:10:12 OMV01 kernel: [ 450.924583] eth0: renamed from veth8b6f245

Und folgende Meldungen habe ich auch:
Nov 19 10:06:46 OMV01 kernel: [ 245.702548] br-97126a9a6c30: port 1(vethaf936b2) entered blocking state
Nov 19 10:06:46 OMV01 kernel: [ 245.702552] br-97126a9a6c30: port 1(vethaf936b2) entered forwarding state
Nov 19 10:10:12 OMV01 kernel: [ 450.803668] br-97126a9a6c30: port 1(vethaf936b2) entered disabled state

Ist das normal, oder habe ich eine Fehlkonfiguration?

elmero · 19. November 2016

Hallo zusammen

OMV ist bei mir virtualisiert. Früher (OMV2) hat der Reboot sowie auch Shutdown problemlos funktioniert. Mit OMV3 funktioniert der Reboot zwar. Der Shutdown (halt command auf CLI) leider nicht. Die Services sind zwar nicht mehr verfügbar, jedoch wird die VM nicht komplett heruntergefahren.

elmero · 17. November 2016

Zitat von happyreacer

Es gibt auch ein plugin von omv-extras in omv3 das nennt sich openmediavault-backup und sichert einfach deine systemplate. Diese könntest du dann einfach wieder rückspiegeln oder direct verwänden.

Ja das habe ich gesehen. Da kann ich das Backup übers GUI starten. Wie starte ich denn dies auf der CLI? Dachte mit dem Befehl: omv-mkconf backup backup

Oder ist das falsch?
Ich möchte beim starten des OMV Backups auf der CLI ein exclude von /var/lib/docker angeben. Funktioniert das und wenn ja wie lautet der Befehl dafür?

elmero · 17. November 2016

Hallo zusammen

Hatte früher in OMV2 ein Script mit welchem ich OMV gesichert habe. Dort nutzte ich den Befehl omv-mkconf backup backup. Das wollte ich jetzt auch auf meinem neuen OMV3 machen. Jedoch wird mein Backup riesig. (ca. 100GB). Obwohl OMV ja nicht soviel Platz benötigt.
Die Ursache habe ich gefunden, nämlich docker. Es werden ziemlich viele Daten von docker (/var/lib/docker) mitgesichert. Diese benötige ich aber nicht zwingen. Kann ich entsprechende Verzeichnisse excluden?

Besten Dank.

elmero · 15. November 2016

Danke. Habe aber die Service mit dem systemctl Command deaktiviert. (systemctl disable smbd.service). Hat so auch geklappt.
Was ich mich jetzt frage, ist ob vielleicht noch mehr Service laufen, die eigentlich nicht laufen sollen?
Könntest du dies mal prüfen. Hier der Output:

UNIT LOAD ACTIVE SUB DESCRIPTION
acpid.service loaded active running ACPI event daemon
avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack
collectd.service loaded active running LSB: manage the statistics collection daemon
console-setup.service loaded active exited LSB: Set console font and keymap
cpufrequtils.service loaded active exited LSB: set CPUFreq kernel parameters
cron.service loaded active running Regular background program processing daemon
dbus.service loaded active running D-Bus System Message Bus
getty@tty1.service loaded active running Getty on tty1
hdparm.service loaded active exited LSB: Tune IDE hard disks
ifup@eth0.service loaded active exited ifup for eth0
kbd.service loaded active exited LSB: Prepare console
keyboard-setup.service loaded active exited LSB: Set preliminary keymap
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
loadcpufreq.service loaded active exited LSB: Load kernel modules needed to enable cpufreq scaling
lvm2-monitor.service loaded active exited Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling
mdadm-raid.service loaded active exited LSB: MD array assembly
monit.service loaded active running LSB: service and resource monitoring daemon
networking.service loaded active running LSB: Raise network interfaces.
nfs-common.service loaded active running LSB: NFS support files common to client and server
nginx.service loaded active running A high performance web server and a reverse proxy server
nmbd.service loaded active running LSB: start Samba NetBIOS nameserver (nmbd)
openmediavault-engined.service loaded active running The OpenMediaVault engine daemon that processes the RPC request
openmediavault-udev-write-dev-rule-link-rules.service loaded active exited udev Write the /dev/root link rules
php5-fpm.service loaded active running The PHP FastCGI Process Manager
postfix.service loaded active running LSB: Postfix Mail Transport Agent
quota.service loaded active exited Initial Check File System Quotas
rc-local.service loaded active exited /etc/rc.local Compatibility
resolvconf.service loaded active exited Nameserver information manager
rpcbind.service loaded active running LSB: RPC portmapper replacement
rrdcached.service loaded active running LSB: start the RRDtool data caching daemon
rsyslog.service loaded active running System Logging Service
samba-ad-dc.service loaded active exited LSB: start Samba daemons for the AD DC
● smartd.service loaded failed failed Self Monitoring and Reporting Technology (SMART) Daemon
ssh.service loaded active running OpenBSD Secure Shell server
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-setup-dgram-qlen.service loaded active exited Increase datagram queue length
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-settle.service loaded active exited udev Wait for Complete Device Initialization
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
udev-finish.service loaded active exited Copy rules generated while the root was ro

Läuft etwas zuviel?

Danke dir.

elmero · 14. November 2016

Habe soeben OMV3 installiert und festgestellt, dass diverse Service gestartet sind (FTP, NFS, SMB, SNMP, TFTP). Habe die Service versucht von Hand (z.b. service smbd stop / start) zu starten und anschliessend wieder stopen. Danach werden diese im Dashboard auch als nicht Running angezeigt. Nach einem Reboot laufen sie aber wieder.
Wie krieg ich die dauerhaft deaktiviert?

Danke.

elmero · 28. September 2016

Grossartig. Funktioniert sauber.
Überall die Standardsettings (Postfix, FTP,...) ist korrekt nehme ich an?

Was mir gerade aufgefallen ist, dass nach der Installation im Dashboard wird mir angezeigt, dass FTP, NFS, SMB/CIFS, SNMP und TFTP running ist. Ist das normal, weil enabled sind die Dienst aktuell nicht.

Danke für deine Unterstützung.

elmero · 28. September 2016

OK. Meinst du diese Anleitung?
Howto install OpenMediaVault on Debian 7.x (Wheezy)

Verhält sich das ganze mit Debain 8 und OMV3 gleich?
Wenn ich das so mache, habe ich OMV mässig das genau gleich, wie wenn ich Euer ISO nutzen würde?

elmero · 28. September 2016

Hallo zusammen

Bin gerade OMV3 auf meinem Hyper-V 2016 Host am testen. Bei Hyper-V 2016 kann man nun Generation 2 VM's auch für Linux nutzen. Das bedeutet mit EFI Unterstützung.
Leider funktioniert das beim omv_3.0.36-amd64.iso nicht. Sieht so aus, als ob das nicht mit EFI bootet. Zum testen habe ich mir mal das aktuellste Debian8 ISO heruntergeladen und damit funktionierts.
Ist es geplant, bald auch eine EFI Unterstützung zu bieten?

Danke & Gruss

elmero · 21. September 2016

Is BTRFS and RAID5 now stable?

elmero · 16. September 2016

Wird das mit dem Filesystem umhängen so klappen?

elmero · 13. September 2016

Hallo zusammen

Meine OMV2.x Installation läuft seit zwei Jahren. Bin auch sehr zufrieden mit OMV und möchte es auch weiter nutzen. In Zukunft jedoch mit Docker. Und auch gleich mit der neuen OMV 3.x Version. Das Update von v2 -> v3, gibt es ja noch nicht und ich möchte sowieso neuinstallieren.
Mein Setup ist wie folgt: Windows Server 2012 R2 inkl. Hyper-V. OMV ist eine VM und habe 4 Harddisks (WD Red) an die VM durchgereicht (Passthrough). Diese in einem RAID 5 Verbund und ext4 als Filesystem.

Die Neuinstallation habe ich folgendermassen geplant: OMV3 als VM installieren. Die ganz Konfiguration vornehmen analog der bestehenden OMV2 VM. Mein ext4 FS unmounten in OMV2. Die Harddisk in Hyper-V der neuen OMV3 VM anhängen. In OMV das Filesystem mounten. Wenn ich dann die Shares wieder analog der alten Installation konfiguriere, sollte ich wieder Zugriff haben. Korrekt?
Die Harddisk würde ich natürlich in der gleichen Reihenfolge der VM hinzufügen, wie es vorher war.
Trotzdem kleine Verständnisfrage: Falls es nicht die gleiche Reihenfolge ist, würde das RAID 5 trotzdem sauber erkannt werden?

OMV3 ist mittlerweile in der Grundfunktionalität stable. Nur noch nicht alle Plugins. Stimmt das so?
Plugins will ich sowies nicht gross nutzen. Werde alles mit Docker machen, und dafür brauche ich das GUI Plugin nicht.

Danke für Euer Feedback.

Gruss

elmero · 4. November 2015

Ok, I will remove php and owncloud. Will then the owncloud config files also deleted, or only the application?
It's possible that i can install openmediavault and owncloud after the remove on the debian system. And everything should work like before? I know I will have the message in the owncloud admin center. But it will works.

elmero · 4. November 2015

I've tried the first command:

The following packages were automatically installed and are no longer required:
acpid beep ca-certificates-java collectd collectd-core cpufrequtils cron-apt dbconfig-common fontconfig fontconfig-config gdisk hdparm ifenslave-2.6 java-common libaio1 libasound2 libasyncns0 libatk-wrapper-java
libatk-wrapper-java-jni libatk1.0-0 libatk1.0-data libcairo2 libcap-ng0 libcpufreq0 libcups2 libdatrie1 libdbd-mysql-perl libdbi-perl libdbi1 libdevmapper-event1.02.1 libdrm2 libffi5 libfile-copy-recursive-perl
libflac8 libfontconfig1 libgd2-xpm libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgif4 libgl1-mesa-glx libglapi-mesa libglib2.0-0 libgtk2.0-0 libgtk2.0-common libice6 libicu48 libjasper1
libjavascript-minifier-xs-perl libjpeg8 libjs-extjs5 libjson-perl libjson0 liblcms2-2 liblocale-po-perl libltdl7 libmagic1 libmcrypt4 libmysqlclient18 libnspr4 libnss3 libntfs10 libogg0 libonig2 libossp-uuid16
libpango1.0-0 libperl4-corelibs-perl libperl5.14 libpixman-1-0 libpq5 libpulse0 libqdbm14 librrd4 libsctp1 libsensors4 libsm6 libsndfile1 libsnmp-base libsnmp15 libt1-5 libtalloc2 libtdb1 libthai-data libthai0
libtiff4 libvorbis0a libvorbisenc2 libvpx1 libwbclient0 libx11-6 libx11-data libx11-xcb1 libxau6 libxcb-glx0 libxcb-render0 libxcb-shm0 libxcb1 libxcomposite1 libxcursor1 libxdamage1 libxdmcp6 libxext6 libxfixes3
libxft2 libxi6 libxinerama1 libxpm4 libxrandr2 libxrender1 libxslt1.1 libxtst6 libxxf86vm1 lsof lvm2 monit mysql-client-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 nginx nginx-common
nginx-full ntfs-3g openjdk-7-jre openjdk-7-jre-headless pm-utils proftpd-basic proftpd-mod-vroot python-apt-common python3 python3-apt python3-minimal python3.2 python3.2-minimal quotatool rrdcached rrdtool samba
samba-common samba-common-bin sdparm shared-mime-info smartmontools snmpd socat testdisk tftpd-hpa ttf-dejavu-core tzdata-java update-inetd uuid wpasupplicant x11-common xmlstarlet
Use 'apt-get autoremove' to remove them.
The following packages will be REMOVED:
mywebsql* owncloud* owncloud-config-apache* owncloud-server* php-apc* php-json-schema* php-pear* php-xml-parser* php5* php5-apcu* php5-cgi* php5-cli* php5-common* php5-curl* php5-fpm* php5-gd* php5-intl* php5-ldap*
php5-mcrypt* php5-mysqlnd* php5-pam* php5-pgsql* php5-proctitle* php5-sqlite*
0 upgraded, 0 newly installed, 24 to remove and 0 not upgraded.
After this operation, 132 MB disk space will be freed.

This will delete php and also owncloud. This is right? It's not possible only delete php without owncloud?

And also thank for the hint with the docker plugin. It's not a problem to migrate my owncloud data and mysql db to the docker container? Or will only owncloud run in the docker and the data and mysql db will run on the debian self?

elmero · 4. November 2015

Hi

Last week i have updated my owncloud installation to 8.2. owncloud is self installed and not with your plugin. After the update, I've seen a message in the owncloud admin center that the actual php version is not recommended. i've updated php from 5.4 to 5.5. That worked and the message disappeared in the owncloud admin center.

Today I wanted login in the OMV admin center, butI have a 403 Forbidden. Also no omv commands are available on the CLI.

Here is an output with the installed software:
root@OMV01:/# dpkg --list | grep openm
rc openmediavault 2.1.17 all Open network attached storage solution
rc openmediavault-backup 1.0.11 all backup plugin for OpenMediaVault.
rc openmediavault-jdownloader 1.0.10 all OpenMediaVault Jdownloader plugin
ii openmediavault-keyring 0.4 all GnuPG archive keys of the OpenMediaVault archive
rc openmediavault-mysql 1.0.16 all MySQL plugin for OpenMediaVault.
rc openmediavault-omvextrasorg 2.7 all OMV-Extras.org Package Repositories for OpenMediaVault

root@OMV01:/# dpkg --list | grep php
rc php-apc 3.1.13-1 amd64 APC (Alternative PHP Cache) module for PHP 5
ii php-json-schema 0.2.0 all PHP implementation of JSON schema
ii php-pear 5.5.30-1~dotdeb+7.1 all PEAR - PHP Extension and Application Repository
ii php-xml-parser 1.3.4-6 all PHP PEAR module for parsing XML
ii php5 5.5.30-1~dotdeb+7.1 all server-side, HTML-embedded scripting language (metapackage)
ii php5-apcu 5.5.30-1~dotdeb+7.1 amd64 apcu module for php5
ii php5-cgi 5.5.30-1~dotdeb+7.1 amd64 server-side, HTML-embedded scripting language (CGI binary)
ii php5-cli 5.5.30-1~dotdeb+7.1 amd64 command-line interpreter for the php5 scripting language
ii php5-common 5.5.30-1~dotdeb+7.1 amd64 Common files for packages built from the php5 source
ii php5-curl 5.5.30-1~dotdeb+7.1 amd64 CURL module for php5
ii php5-fpm 5.5.30-1~dotdeb+7.1 amd64 server-side, HTML-embedded scripting language (FPM-CGI binary)
ii php5-gd 5.5.30-1~dotdeb+7.1 amd64 GD module for php5
ii php5-intl 5.5.30-1~dotdeb+7.1 amd64 internationalisation module for php5
ii php5-ldap 5.5.30-1~dotdeb+7.1 amd64 LDAP module for php5
ii php5-mcrypt 5.5.30-1~dotdeb+7.1 amd64 MCrypt module for php5
ii php5-mysqlnd 5.5.30-1~dotdeb+7.1 amd64 MySQL module for php5 (Native Driver)
rc php5-pam 1.0.3-2 amd64 pam module for PHP 5
ii php5-pgsql 5.5.30-1~dotdeb+7.1 amd64 PostgreSQL module for php5
rc php5-proctitle 0.1.2-2 amd64 proctitle module for PHP 5
ii php5-sqlite 5.5.30-1~dotdeb+7.1 amd64 SQLite module for php5

But jdownloader / msqly works fine.

How can I reinstall openmediavault without data loss? When I will install with apt-get i receive the following error:

root@OMV01:/# apt-get install openmediavault
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
openmediavault : Depends: php5-pam but it is not going to be installed
Depends: php5-proctitle but it is not going to be installed
E: Unable to correct problems, you have held broken packages

Thank you for your support, and sorry for my english.

elmero · 31. März 2015

Zitat von davidh2k

Sieht für mich alles tutti aus...

Gruß
David

Ok. Besten Dank.

elmero · 30. März 2015

Und hier noch die beiden anderen:

Zitat

smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-2012r2(64)] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4EFKZLVF7
LU WWN Device Id: 5 0014ee 20af80045
Firmware Version: 82.00A82
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Mar 30 14:00:12 2015 WEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (52860) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 529) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 203 185 021 Pre-fail Always - 6808
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 17
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3384
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5709
194 Temperature_Celsius 0x0022 121 116 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-2012r2(64)] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, http://www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD40EFRX-68WT0N0
Serial Number: WD-WCC4EKCEFXT0
LU WWN Device Id: 5 0014ee 2604d93e1
Firmware Version: 82.00A82
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Mar 30 14:00:17 2015 WEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (54240) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 542) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 204 186 021 Pre-fail Always - 6800
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 17
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3384
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5715
194 Temperature_Celsius 0x0022 121 115 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Alles anzeigen

elmero · 30. März 2015

Hallo zusammen,
habe smartctl jetzt mal auf dem Windows Host ausgeführt und das hat funktioniert. Was haltet ihr von den Werten. Sieht es in Ordnung aus? was findet ihr betreffend dem LCC Wert? Ist der in Ordnung?

Hier der Output von meiner ersten WD Red Platten.

Code

smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-2012r2(64)] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org


=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red (AF)
Device Model:     WDC WD40EFRX-68WT0N0
Serial Number:    WD-WCC4ENNRSLV0
LU WWN Device Id: 5 0014ee 20af86ebe
Firmware Version: 82.00A82
User Capacity:    4 000 787 030 016 bytes [4,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Mar 30 14:00:05 2015 WEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED


General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (52020) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 520) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x703d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.


SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   203   187   021    Pre-fail  Always       -       6808
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       17
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3384
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       17
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       7
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       5707
194 Temperature_Celsius     0x0022   123   119   000    Old_age   Always       -       29
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0


SMART Error Log Version: 1
No Errors Logged


SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Alles anzeigen

elmero · 30. März 2015

Hallo zusammen,
zuerst habe ich Plex über die omv-extras installiert. Später habe ich das entfernt und Plex direkt installiert (mit entsprechender Source).

Wenn ich jetzt ein dpkg -l mache habe ich folgenden Output:
# dpkg -l | grep plex
rc openmediavault-plexmediaserver 1.0.9 all OpenMediaVault Plex Media Server plugin
ii plexmediaserver 0.9.11.16.958-80f1748-debian amd64 Plex Media Server for Linux

Jetzt der openmediavault-plexmediaserver hat Status: rc. Also entfernt, aber die Config Files existieren noch.
Wie kann ich verifizieren, wo die Control Files liegen.

Wenn ich jetzt ein dpkg --purge openmediavault-plexmediaserver ausführe, könnte sein, dass mein Plex nicht mehr sauber läuft?

Beiträge von elmero

Shutdown (halt) funktioniert nicht

Ethernet Meldungen nach Reboot

Shutdown (halt) funktioniert nicht

Backup (omv-mkconf)

Backup (omv-mkconf)

Diverse Service gestartet nach Installation

Diverse Service gestartet nach Installation

OMV mit EFI?

OMV mit EFI?

OMV mit EFI?

Which filesystem to use?

Neuinstallation mit altem Filesystem

Neuinstallation mit altem Filesystem

After PHP Upgrade, OMV doesn't work

After PHP Upgrade, OMV doesn't work

After PHP Upgrade, OMV doesn't work

SMART schlägt fehl

SMART schlägt fehl

SMART schlägt fehl

Plex / Alte Config Files