Beiträge von elmero

  • SMART schlägt fehl

    Weil ich einen Hypervisor brauchte. Und mit VMware habe ich beruflich schon zu tun. Deswegen wollte ich Hyper-V verwenden und der Windows Host ist zusätzlich auch mein Jump Host für Zugriff von Extern.

  • SMART schlägt fehl

    Mein Server ist ein Windows Server 2012 R2. Windows ist auf einer SSD installiert. Die 3 WD RED (4TB) Platten sind physikalisch normal diesem Server angehängt, jedoch im Disk Manager von Windows sind diese Offline.
    OMV läuft in einer VM und die 3 WD RED Platten werden Passthrough an die OMV VM durchgereicht. In OMV habe ich ein RAID 5 über diese 3 WD RED.


    Aktuell läuft smartctl auf OMV nicht.


    Meine Frage daher ist, ob ich den SMART Status gar nicht in OMV sondern in Windows abfragen muss?

  • SMART schlägt fehl

    Habe die DB aktualisiert. Leider immer noch den selben Fehler:


  • SMART schlägt fehl

    Hallo zusammen


    Ich kann auf meinem OMV kein SMART Status abfragen:



    Den Fehler erhalte ich auf allen meinen 3 WD Red Festplatten.


    Auf meinem Server ist Windows 2012R2 Hyper-V installiert. OMV läuft als VM. Die 3 WD Red Platten werden Passthrough direkt an OMV durchgereicht.
    Habt ihr eine Idee, wieso SMART bei mir nicht funktioniert?


    Besten Dank.

  • Owncloud 7 setup guide Qustions

    Hi tekkb


    I hadn't followed your guide for the owncloud installation. I installed owncloud manually with apt-get install owncloud. This installed owncloud v6. After this installation i updated owncloud to version 7 within the webgui.
    Now all works fine with version 7.0.3.


    But in dpkg i have version 6.x.
    root@OMV01:~# dpkg -l | grep owncloud
    ii owncloud 6.0.4-0 all ownCloud Server - Private file sync and share server


    Can I change this?

  • Deinstallation Seafile

    But i hadn't intalled seafile with apt. Only copied the files in a directory.


    When i execute the command:
    # dpkg -P seafile
    dpkg: warning: ignoring request to remove seafile which isn't installed

  • Deinstallation Seafile

    Hi,


    on my OMV i had installed different plugins (ownclouod, plex, jdownloader, backup, mysql). last week i had tested seafile, but now i will delete this.
    For the seafile installation i had to install the following packages:
    apt-get install python2.7 python-setuptools python-simplejson python-imaging python-mysqldb


    Now I'm not sure if i need this package for my other plugins or not. How can i check this?


    Thanks a lot.

  • S.M.A.R.T. Test on my NAS

    No. i receive this error:


    smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net


    Vendor: WDC
    Product: WD40EFRX-68WT0N0
    Revision: 82.0
    User Capacity: 4,000,787,030,016 bytes [4.00 TB]
    Logical block size: 512 bytes
    >> Terminate command early due to bad response to IEC mode page


    Error Counter logging not supported
    Device does not support Self Test logging
    Device does not support Background scan results logging
    scsiPrintSasPhy Log Sense Failed [unsupported scsi opcode]

  • S.M.A.R.T. Test on my NAS

    Hi
    I have a Windows 2012 R2 Hyper-V Server. OMV is a VM and 3 WD RED 4 TB Disks are passtrough assigned to the VM. In OMV i had created a RAID5 with EXT4.
    All works fine, except S.M.A.R.T.


    I had enabled SMART in the Settings and also on the Disks. When i open the information of a disk i had no informations and under extended information i have the following output:


    smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net


    Vendor: WDC
    Product: WD40EFRX-68WT0N0
    Revision: 82.0
    User Capacity: 4,000,787,030,016 bytes [4.00 TB]
    Logical block size: 512 bytes
    >> Terminate command early due to bad response to IEC mode page
    A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.



    If I execute a short-sefl test i receive the following error:
    smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net


    Short offline self test failed [Input/output error]



    What is the problem. Is SMART in my environment (passthrough Disks) not supported?


    Thanks.

  • openmediavault-jdownloader Plugin

    Ok. But how can i connect the plugin to my.jdownloader.com ?


    On the console, when i stop / start jdownloader i have this output:


    /etc/init.d/jdownloader start
    Starting Jdownloader daemon:
    Already running


    /etc/init.d/jdownloader stop
    Stopping Jdownloader daemon:
    Not running so not Stopping Jdownloader daemon:


    It's that correct?

  • openmediavault-jdownloader Plugin

    Hi,


    I had installed the omv-jdownloader plugin and edited the settings in the OMV WebGUI.
    Actually in my.jdownloader.com it's the hint, that no jdownloader is connected.


    On the OMV Services, jdownloader is enabled but not running (a red bubble).