Hi
I Installed Deluge without any problem.
The webgui works and i can download/upload.
I cant figure out how to connect to that webgui with my ordinary Deluge installation.
I want to control deluge webgui from my Windows PC.
I want to shut down my pc , and let the torrents keep running on the OMV machine.
Also need som help regarding pointing the //downloads in deluge to the correct place on my OMV shares
Hopefully someone can sort this out .
Keep up the good work 
Question : is there away to get what you had in the recyclebin on omv.
I empty IT by mistake .
the last command i was hoping to fix part of the problem , but i think it fuxurd the filesystem
The last command on the screen in that picture , i Should say 
Oki , i learned something atleast.
I workt out what exakt drives that had bad superblocks.
I also found out how to display copies of superblocks on each disks.
Tries to fix/repair Them .
But Did not got any luck , but Its abit like investigating 
I think that omv Did not like that i had feernas installed on the disks .
Because 2 reported as zfs members and i Did not enable that in omv.
not new data
no new data should it be....:)
i did a fresh install on omv an a external harddrive.
and the raid6 filesystem are there during install , but as i said no filesystem , i think there is a way to fix that , or hope
Last login: Thu Oct 6 23:25:50 2016
root@HP-Z400-Workstation:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid6 sde[10] sdb[0] sdd[9] sdc[8] sda[7] sdj[5] sdi[4] sdh[3] sdg[2] sdf[1]
23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/9] [UUUUUU_UUU]
[==>..................] recovery = 14.7% (432694060/2930135040) finish=440.2min speed=94548K/sec
bitmap: 0/22 pages [0KB], 65536KB chunk
fsck.ext4 /dev/md0 did not resolve in any filesystem tho 
get errors
Hi again ryecoaaron , i was actually able to create a md0 with a command i googled.
got 9 out of 10 drives , and added the last drive in the webgui , so the raid is up again
and now new data has been written to the discs since crash..
one problem tho no files or filesystem popup in omvwebgui
the raid shows tho
is there away ti get the actual files back? or filesystem and folders?
using command or som resquecd
my array is called md0 now
Ok i understand . Just got Therese discs and new chassi and stuff so not fun.
But the good news Is the data mostly torrents that i can download again. But alot of Them..
IF i could find where the superblock is Then maybe
IT reports that IT cant be found on sda
When i do this.
18 hours ago
Assuming sdk is still the boot drive, I would try:
mdadm --stop /dev/md0
mdadm --assemble --force --verbose /dev/md127 /dev/sd[abcdefghij]
Thanx for your reply , so there something more i could try ?
By the way , Did not meen to upset you.
I know you are elite at this ,)
Just abit Sad about the whole thing ....
Ok , just to be sure .
To rebuild the array, do i need to have the omv boot media attached ? I cloned the messed up USB you know.
I assume resquecd is enough to rebuild.??
Maybe more moderators could help ?
This is abit , is the arrayinfo stored on all the 10 driver Or only on the omv installation
thanx for the support ryecoaaron btw , i really like it , , i have no usb key or omv attached to the machine just drives and usb dvd-rw
I have moved out the drives and stacked them ontop of eachother so i can handle the cables more easily :)..
seems like i swapped the discs / cables around maybe...the drives show up atleast....
i have more pictures also with command output
cat /proc/mdstat
i did that but, then i got this
how can i see on what drive the superblock is?
That is omv booting
I Did try Ubuntu , that Did not seem to mount .
Rescuecd , Did not mount the array either
Would like som tool to diagnos the USB
Can i repair Or serch for the array ?
Had a mdadm problem 2 years Ago you help me Then Or zubzero
You Schould have that on first page of omv
Dont install on USB . In this case , My setup lastad 4days
i have tried alot of different cables and stuff
will there be any differens i buy a new motherboard with enough sataports
a discs are found in bios so..
is it really the usb? I HAVE CLONED THE USB TO AN SSD
DAMN..
Tell me all info u need to help me out , please
Ok , i really hope so .
The machine is a HP Z400 so no shit.
You mean like a new Ubuntu install on new usb/disc ?
http://www.webhallen.com/se-sv…Kr2lZPvvs8CFanUcgod-xkDDA
that link goes to the USB i use . no shit memory either. i have 2of them.
I will post some pics so moderators can see how my boot look , and what errors i got.
I want to try alot of things before.... , point of no return.
Thankful for commands that i can use to sort things out.
hm well i cant find so much to change regarding delay in bios . even tho i takes some time for the bios to work .
tried to check speed it up , but no change .
will post pictures from my boot later on.
. next thing is to check cables.
i bought a intel pci expresscard , that fixed the speedissue i had .first 100mbit .now 1000mbit . local that is .
as long i can get my data back , i am ok . but did not expect this.
can i get my data back?
ok i , will have to check for delays .
where do i upload the systemreport?
i have checked the cables , but may maybe change them around.
this sucks monkeyballs
