Beiträge von tree

  • Upgrade from 1.19 to 2.1 mishap

    Thank you for help with the certificate-details. :)
    The configurationfile you told, missed these two lines (the same values are in 'OMV_CERTIFICATE_...':
    OMV_SSL_CERTIFICATE_DIR="/etc/ssl"
    OMV_SSL_CERTIFICATE_PREFIX="openmediavault-"


    OK: I marked to watch for nightly builds.
    After unmarking, I had to install 'php5-pam'
    => web admin: 502 Bad Gateway - nginx
    ==> dpkg -i php5-pam_1.0.3-2_armhf.deb php5-proctitle_0.1.2-2_armhf.deb
    => web admin works again.
    ==> Is the current package for rpi correct?


    The problems at login "Error in Skript: 192.168.0.101/extjs/ext-all.js:22" and the need to enter a passphrase on update just exist.


    Some further ideas?

  • Upgrade from 1.19 to 2.1 mishap

    So, I searched and found how to genarate a new ssh-key.


    Now, I generated a new ssh-key like this:
    ssh-keygen -t rsa -b 4096 -C "my_email@example.com"


    After that, I opend the web admin - I got this error and continued - but the web admin is open :) :

    Zitat

    Ein Skript auf dieser Seite ist eventuell beschäftigt oder es antwortet nicht mehr. Sie können das Skript jetzt stoppen, im Debugger öffnen oder weiter ausführen.


    Skript: http://192.168.0.101/extjs/ext-all.js:22


    The next way was to see the 'actuell' certificates.
    My old SSL-certificate is included and I can gernerate a new one, but I can't see details:


    An update via CLI is also not possible because there is an open update and the "passphrase" is allways needed:

  • Upgrade from 1.19 to 2.1 mishap

    Yes, this could be my problem.
    Blank or "openmediavault" didn't solved it - I tried before.


    At the moment I can't say why I configured a ssl-certificate in OMV.
    Do you know, how to reset or delete this certificate, so it isn't necessarry any more?

  • Upgrade from 1.19 to 2.1 mishap

    I have this problem, too:


    I have no idea what I should type in.


    Now I can't user the "web admin interface". After login, I get a white page.


    What should I do now?

  • Calibre - Problem to install

    Hi,


    thank you for your bad message ;)
    I saw an instruction to install the calibre-server on Raspbery Pi - but not for OMV.


    Because I'm beginner: Can you explain me, which type of armel/armhf-file or -package we need?

  • Calibre - Problem to install

    Hello,


    I installed the Calibre-plugin from the extensions without errors.
    But after configuring the "web interface" and the "book import", it doesn't works. The error-message:

    Zitat

    Failed to execute command '/opt/calibre/calibredb list --library-path "/media/a16c8c24-8ac8-4ee3-8d5a-b79f94e09aba/calibre/" -f title,authors --separator " " 2>&1': /opt/calibre/calibredb: 1: /opt/calibre/calibredb: Syntax error: "(" unexpected


    From other threads I read this error-message for other systems (I'm using an raspberry pi) and I tried this code:

    Code
    wget http://omv-extras.org/testing/install_calibre.sh
chmod +x install_calibre.sh
./install_calibre.sh


    The installation looks fine (no error):


    But the error-message at the end is the same :thumbdown: and I wonderes about the download of an "i686" file. Is this the correct file for my raspberry pi?


    Thanks for help :)

  • Can't acivate FTP

    Reinstall proftpd was no good idea.
    At the end of this idea I reinstalled OMV again - with no success for FTP.


    I checked google for the error I had and found in this forum an new package of mod-vroot, compiled an raspberry pi.


    Code
    wget http://omv-extras.org/testing/proftpd-mod-vroot_0.9.2-3_armhf.deb
dpkg -i proftpd-mod-vroot_0.9.2-3_armhf.deb


    After loading this and installing it, FTP works.

  • Can't acivate FTP

    At first I thank you for help and ideas.
    I see, that there is no guarantee for all and there are 'only' ideas.


    This is the result:

    Zitat

    Checking syntax of configuration file
    Ungültiger Maschinenbefehl


    = invalid command

  • Can't acivate FTP

    Hello,


    on activating FTP on my Raspberry PI-OMV, I got the error "...unable to register 'memcache' SSL session...".
    So I read in this forum, and I uncommented "LoadModule mod_tls_memcache.c" in "/etc/proftpd/modules.conf".


    The next try is ending with a new error, I don't understand:



    So who can help me activating FTP?

  • Can't select volume

    Thank you for all.


    First I tried to use one part of my device for ext4 and there gone something wrong.
    Now I cleared the complete device - and now it works fine.

  • Can't select volume

    Until now, I made a backup of my drive.


    Today I cut the usage in SMB of 1 drive, deleted the shared folders and deleted the "free" drive.
    Now I'm trying create a new file system. But on "create" there is no device to select.


    What shall I try now to format the device in ext4?

  • Can't select volume

    Ok. I will wait some days for 1.0.32 and try again. Thank you.
    Perhabs I will change my filesystem later to solve this pending problem for the future.


    So I will close this theme when the new release is installed an the problem is resolved. oK?

  • Can't select volume

    Thank you for your "bad" info about ntfs.


    I'm sure disk-info showed the ntfs-drives before. It's prssible the problem came with OMV 1.0.31 or .30.


    Do you know when the next release should come, which fix the problem?
    Or should I try to copy my files and format/remount the drives by using ext4?

  • Can't select volume

    Here the result:


  • Can't select volume

    The disk was earlier used in other systems, like a backup-disk in windows.
    I remember the disk (with 2 parts /sda1 and /sda2) were automatically detected and mounted.
    Filesystem is ntfs and all shown in "File Systems".


    After installing OMV in Oktober there was all fine. And I build the shares in SMB-Configuration.

  • Can't select volume

    Hello,


    I installed OMV on an Raspberry PI some days ago. The usage with SMB is no problem (from Windows and Android).
    Now I can't select a device from each menu or window.


    The "Physical Disk" is correct, and the shown devices and labels on "File Systems" too.
    But each menu, where I shall select a device, there is no one listed.


    In System Info -> Status -> Disk usage: It is empty


    Actual OMV-Version: 1.0.31


    I'm new in using this system. Please explain me, which way I have to repaire my system.