Hi.
On OMV 2 i access to my files over ssh and copy it internal from disk to disk.
Now, in OMV 3 i can't find my disk.
How can i access to it?
Regards
Ed
Hi.
On OMV 2 i access to my files over ssh and copy it internal from disk to disk.
Now, in OMV 3 i can't find my disk.
How can i access to it?
Regards
Ed
Hi.
I need big help with change name of Shairport Airplay reciver.
In standard Shairport-sync is simple change value of $NAME
In OMV version i don't have idea where it is.
Thx 4 any help
Jacob
PS. Sorry 4 my English
Ok I install debian and everything works ok.
Ok
Model is Intel® NUC Board D33217GKE
Only HDMI audio out.
Forgot that's a nuc. Do you have backport kernel 3.16 installed?
Ok is any chance to help me step by step to configure shairport?
Yes i installed a backport kernels
Yeah i know this topic. But i don't know how edit alsa.conf. All changes not work.
Hi i have problem with shairport plugin.
On my IOS8 iphone i have my omv as airport player but when i start music Shairport is restarting.
This is my shairport.err
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
FATAL: Alsa initialization failed: unable to open pcm device: No such file or directory
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
FATAL: Alsa initialization failed: unable to open pcm device: No such file or directory
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
FATAL: Alsa initialization failed: unable to open pcm device: No such file or directory
Alles anzeigen
I thing is the alsa problem, but i don't know how repair this.
Regards
Hi. Thx for guide. It work like a charm.
But i have problem with autostart kodi on my nuc.
Omv runs.
But i don't understand well how run kodi at startup.
1 point from this site http://kodi.wiki/view/HOW-TO:Autostart_Kodi_for_Linux
not work well.
I change exec su -c "xinit /usr/bin/xbmc --standalone -- -nocursor :0" $USER
to exec su -c "xinit /root/kodi --standalone -- -nocursor :0" $USER
where i compile all.
Please help me
PS. Sorry for my english.
.Ok. Everything now is ok.
I reinstall OMV. Turn off PME EVENT WAKE UP in BIOS, and turn off Wake on lan in OMV.
Now. OMV wake up normal with magic packets.
No 15 minutes sleep.
HAHA
in freenas suspend/sleep option is turned off in kernel.
No i turn off phone for test.
Now i check this on FreeNas.
If this is Realtek bug on Debian i need change a NIC.
But i dont now what NIC choose.
So. I need WOL to wake up my OMV when my phone is in LAN. Then Autoshutdown check ip of my all computers. When all ip is down then going to sleep. For night. Then i woke up with my phone. And loop.
On OMV i have i CIFS share and DLNA service. Nothing more.
Different modes nothing change.
Ok. OMV woke up. Nothing in tcpdump.
I check tcpdump command and send after woke up another magic packets.
Tcpdump catch it so it work
Daaaamn.
Double hibernate nothing change.
Hmm. 9 clients.
Ok i run tcpdump on my mac to sniff port 9.
If any router send wol packets i catch it.
Ok. Pi disconnected and the same issue.
Woke up after 10minutes.
Damn
Thx for answers. Yes this is constant behavior.
Ok i check via tcpdump what send wol packets.
Thx again
This is my ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 1
Transceiver: external
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Link detected: yes
Alles anzeigen
Yes i have openelec on my RPi.
But i not have installed this plugin.
Regards
Ps. Sorry for my english
Yes is Realtek RTL8201CL.
So. What now?
Hi.
I have a little problem with WOL.
How can i check what woke up my OMV?
Only one ip send magic packets but after 10 minutes hibernation OMV woke up.
I don't see anything suspicious in syslog.
Regards
Jakub