Beiträge von afxomv

Hi all,

well I'm working a bit better but something still isn't right. On boot no interfaces actually come up although all are visible with ipconfig -a - /etc/network/interfaces have all the correct addresses but just arent 'loaded'. I manually configure eth0 with ifconfig and I can get onto OMV - resolv.conf also has to be manually updated too. If I make a change to a network interface in OMV gui it updates /etc/network/interfaces but doesnt apply the changes to the live interface...same for deleting in the gui. If the loopback interface hasn't been brought up I get the error #4000 when making changes in gui.

Is OMV overriding something in networking to stop the interfaces cfg being loaded? I dont know Linux well enough to troubleshoot further...I have tried!

Cheers,

Kev

Hi,

I tried the last 2 commands - they went ok and omv-firstaid ran ok taking the addresses for each interface. I see the IP is there in config.xml but it didnt apply to the 'real' interface. I then rebooted to see if it would apply and now I have no interfaces up. /etc/network/interfaces has the correct cfg for eth0 but this hasn't applied...I have brought eth0 up but it hasnt assigned the IP in /etc/network/interfaces

I ran firstaid again but this now fails with the #4000 error with failed to execute RPC.

Thanks votdev,

I tried the restart but got an error:
monit restart omv-engined
monit: Cannot connect to the monit daemon. Did you start it with http support?

I get a similar error when logging into the gui on the dhcp address and it has changes to commit :

Failed to execute command 'export LANG=C; monit restart collectd 2>&1': monit: Cannot connect to the monit daemon. Did you start it with http support?

Error #4000:
exception 'OMVException' with message 'Failed to execute command 'export LANG=C; monit restart collectd 2>&1': monit: Cannot connect to the monit daemon. Did you start it with http support?' in /usr/share/php/openmediavault/monit.inc:113
Stack trace:
#0 /usr/share/php/openmediavault/monit.inc(70): OMVMonit->action('restart', 'collectd', false)
#1 /usr/share/openmediavault/engined/module/collectd.inc(53): OMVMonit->restart('collectd')
#2 /usr/share/openmediavault/engined/rpc/config.inc(206): OMVModuleCollectd->startService()
#3 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array)
#4 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
#5 /usr/share/php/openmediavault/rpcservice.inc(158): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array)
#6 /usr/share/openmediavault/engined/rpc/config.inc(224): OMVRpcServiceAbstract->callMethodBg('applyChanges', Array, Array)
#7 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array)
#8 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
#9 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array)
#10 /usr/sbin/omv-engined(500): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1)
#11 {main}

I'm prepared to rebuild if this isn't an easy fix but I do appreciate you troubleshooting!

Good morning,

Please find output below as requested.

# omv-engined -d -f
Registered RPC services:
  afp
  apt
  aufs
  certificatemgmt
  clamav
  config
  cron
  diskmgmt
  dnsmasq
  emailnotification
  exec
  filesystemmgmt
  folderbrowser
  fstab
  ftp
  iptables
  logfile
  minidlna
  network
  nfs
  notification
  omvextrasorg
  plugin
  powermgmt
  quota
  raidmgmt
  rrd
  rsync
  rsyncd
  services
  sharemgmt
  shellinabox
  smart
  smb
  snapraid
  snmp
  ssh
  syslog
  system
  tftp
  usermgmt
  webgui
  zeroconf
Registered modules:
  acpid
  afp
  apt
  aufs
  certificatemgmt
  clamav
  collectd
  cpufrequtils
  cron
  cronapt
  dnsmasq
  email
  fstab
  ftp
  halt
  hdparm
  hostname
  hosts
  interfaces
  iptables
  mdadm
  minidlna
  monit
  networking
  nfs
  ntp
  omvextrasorg
  pam
  php5fpm
  quota
  rsync
  rsyncd
  samba
  shellinabox
  smartmontools
  snapraid
  snmp
  ssh
  sysctl
  syslog
  tftp
  timezone
  webadmin
  webserver
  zeroconf

Hi all,

I've been running OMV since 0.5 on my N54L and all has been well until I had to power off the NAS. On power on I had no gui/ssh so hooked KVM up and saw OMV was running ok but I had no interfaces in ifconfig, no IP address so no external access. Since my last reboot I have applied all updates pushed out to the box. I am running 1.14.

I have the onboard eth0 and an intel 2x gig-e pci card.eth0 was for wifi access, eth1 for direct to mac and eth2 direct to Mint box.

I am able to get an ip via dhcp using the dhclient eth0 command but even though I get an address I can't use any services such as CIFS to this DHCP address.

After the networking 'died' on boot I did try to re-create the /etc/network/interfaces cfg to manually assign the interfaces but this didnt work. I also haven't had any luck with omv-firstaid on each i/f. I'm also seeing a monit error asking if it was setup for http. I've apt-get install --resintall omvmediavault but no change.

Configuring network interface. Please wait ...
{"response":null,"error":{"code":7003,"message":"Failed to read from socket: Resource temporarily unavailable","trace":"exception 'OMVException' with message 'Failed to read from socket: Resource temporarily unavailable' in \/usr\/share\/php\/openmediavault\/rpc.inc:168\nStack trace:\n#0 \/usr\/sbin\/omv-rpc(107): OMVRpc::exec('Network', 'setIface', Array, Array, 2)\n#1 {main}"}}
Failed to execute RPC (service=Network, method=setIface)

Mar 16 22:23:53 lilbit omv-firstaid: Failed to execute RPC (service=Config, method=applyChanges)
Mar 16 22:25:32 lilbit omv-firstaid: Failed to execute RPC (service=Network, method=setIface)
Mar 16 22:26:35 lilbit omv-firstaid: Failed to execute RPC (service=Network, method=setIface)
Mar 16 22:32:14 lilbit monit[6637]: 'nginx' failed, cannot open a connection to INET[127.0.0.1:443] via TCPSSL
Mar 16 22:32:14 lilbit monit[6637]: 'nginx' trying to restart
Mar 16 22:32:14 lilbit monit[6637]: 'nginx' stop: /etc/init.d/nginx
Mar 16 22:32:14 lilbit monit[6637]: 'nginx' start: /etc/init.d/nginx
Mar 16 22:32:49 lilbit monit[6637]: 'nginx' failed, cannot open a connection to INET[127.0.0.1:443] via TCPSSL
Mar 16 22:32:49 lilbit monit[6637]: 'nginx' trying to restart
Mar 16 22:32:49 lilbit monit[6637]: 'nginx' stop: /etc/init.d/nginx
Mar 16 22:32:49 lilbit monit[6637]: 'nginx' start: /etc/init.d/nginx
Mar 16 22:33:25 lilbit monit[6637]: 'nginx' failed, cannot open a connection to INET[127.0.0.1:443] via TCPSSL
Mar 16 22:33:25 lilbit monit[6637]: 'nginx' trying to restart
Mar 16 22:33:25 lilbit monit[6637]: 'nginx' stop: /etc/init.d/nginx
Mar 16 22:33:25 lilbit monit[6637]: 'nginx' start: /etc/init.d/nginx
Mar 16 22:34:00 lilbit monit[6637]: 'nginx' failed, cannot open a connection to INET[127.0.0.1:443] via TCPSSL
Mar 16 22:34:00 lilbit monit[6637]: 'nginx' trying to restart

Really appreciate any advice/time someone has to point me towards the resolution

Kind regards,

Kev

Many thanks!!

I understand this is will need fstab tweaking to stop auto mounting after researching more but dont want to bork my system due to beginner linux skills :-/

root@lilbit:~# sudo blkid
/dev/sda1: UUID="8e695060-c3a6-44ee-9f04-8bed6cb48482" TYPE="ext4" LABEL="DATA4"
/dev/sdb1: LABEL="DATA3" UUID="8acce34a-ed94-404d-9af1-1d55d9940b76" TYPE="ext4"
/dev/sdc1: LABEL="DATA2" UUID="2ee57202-cd49-44f8-be1c-e45708864411" TYPE="ext4"
/dev/sdd1: LABEL="DATA1" UUID="6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0" TYPE="ext4"
/dev/sde1: LABEL="SSD" UUID="d27d3cc0-bfea-46f5-ba61-f8f6c5e4e8be" TYPE="ext4"
/dev/sde5: UUID="011b8279-5107-49ae-81f3-189b45aac175" TYPE="swap"
/dev/sdf1: LABEL="DATA5" UUID="29cfd4a2-ffad-4edf-b94b-e4ee5dd2983b" TYPE="ext4"

Current fstab

root@lilbit:~# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sde1 during installation
UUID=d27d3cc0-bfea-46f5-ba61-f8f6c5e4e8be / ext4 errors=remount-ro 0 1
# swap was on /dev/sde5 during installation
UUID=011b8279-5107-49ae-81f3-189b45aac175 none swap sw 0 0
/dev/sdf1 /media/usb0 auto rw,user,noauto 0 0
tmpfs /tmp tmpfs defaults 0 0
# >>> [openmediavault]
UUID=8e695060-c3a6-44ee-9f04-8bed6cb48482 /media/8e695060-c3a6-44ee-9f04-8bed6cb48482 ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
UUID=8acce34a-ed94-404d-9af1-1d55d9940b76 /media/8acce34a-ed94-404d-9af1-1d55d9940b76 ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
UUID=2ee57202-cd49-44f8-be1c-e45708864411 /media/2ee57202-cd49-44f8-be1c-e45708864411 ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
UUID=6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0 /media/6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0 ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
UUID=29cfd4a2-ffad-4edf-b94b-e4ee5dd2983b /media/29cfd4a2-ffad-4edf-b94b-e4ee5dd2983b ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 2
none /media/STORAGEPOOL aufs br:/media/6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0/DRIVE1SHARE/=rw:/media/2ee57202-cd49-44f8-be1c-e45708864411/DRIVE2SHARE/=rw:/media/8acce34a-ed94-404d-9af1-1d55d9940b76/DRIVE3SHARE/=rw,sum,create=mfs,udba=reval 0 0
/media/STORAGEPOOL /media/6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0/POOLSHARE/ none bind 0 0
/media/6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0/POOLSHARE/ /home/ftp/POOLSHARE none bind 0 0
/media/6f0525d4-97ac-49b0-b8d5-d3154e9ecfe0//LILNFS /export/LILNFS none bind 0 0
/media/8acce34a-ed94-404d-9af1-1d55d9940b76//wardhole /export/WARDHOLE none bind 0 0
# <<< [openmediavault]

Hi,

Is there a way to reoder the disk usage drive tabs in System Information>Status>Disk Usage? Over the past 6months I'd made a few changes and now have my drive labels not 'matching' my dev/sdX
So:

/dev/sda1/ > DATA4
/dev/sdb1/ > DATA3
/dev/sdc1/ > DATA2
/dev/sdd1/ > DATA1
/dev/sdf1/ > DATA5

This is reflected in the order of the tabs in System Info>Status>Disk Usage with sda1 to sde1. I checked in config.xml but didn't find anything to modify.

Many thanks

Afx

Hi,

new registered user on the forum here but been using OMV for the past 6months and I'm enjoying using it. As I'm getting older I am appreciating more the time and effort people put into opensource projects and developers alike so have been donating more...maybe trying to equalize the amount of 'free' software I've had over the years!

Anyways, question is 'are there a key few people in the development team who get the money donated and how is this shared?' I'll defo be donating OMV is my only NAS solution and I want to see it maintained/developed!

Cheers,

Afx