Tada
somehow I did something useful *ohmiracle*
I copied the template like ryecoaaron said.
Then run omv-initsystem
After that firstaid and assigned back to port 80
Now webgui is back up with my assigned pw (I thought its stored in the config.xml)
The plugin tabs are there but the config of most of them is missing.
But nevermind thx for the help!
as stated above the omv-initsystem command seems not to work.
The size of config xml is still zero after using it.
Last hope will be reinstalling omv and then import pool ?
that means i have to reinstall all plugins ?
that command gives me
/etc/openmediavault/config.xml:1.1: Document is empty
^
/etc/openmediavault/config.xml:1.1: Start tag expected, '<' not found
^
/etc/openmediavault/config.xml:1.1: Document is empty
^
/etc/openmediavault/config.xml:1.1: Start tag expected, '<' not found
^
/etc/openmediavault/config.xml:1.1: Document is empty
^
/etc/openmediavault/config.xml:1.1: Start tag expected, '<' not found
^
/usr/share/openmediavault/initsystem/40interfaces: 278: [: -eq: argument expected
/etc/openmediavault/config.xml:1.1: Document is empty
^
/etc/openmediavault/config.xml:1.1: Start tag expected, '<' not found
Hi
i have the same problem my webgui disappeared after installing subsonic. So i removed it but via cli but that didnt fix the problem.
The filesize of my config.xml is 0
-rw------- 1 openmediavault openmediavault 0 Apr 14 16:45 /etc/openmediavault/config.xml
Server is running fine just no webgui 
Any help how to restore ? ( no .bak file in folder)
No i deleted files using ftp client. The Ftp client used the pool as share. When i deleted the files through ftp client the problem began. Cant "see" files in ftp anymore but disks are still full. I thought when i delete them in ftp the files would be deleted physically from the disks, not only deleting some kind of link.
Similar Problem now. One disk was full except of 500 mb free space then i applied the command which was recommended. I let ftp run over night to fill the disks. In the morning i hade Errors again. The nearly full disk was now full 0.0 Bytes left.
I had no overview of what is complete and the wanted to start over with the file Transfer.
So i deleted everything via ftp. But now it seems only some links have been deleted but the actual files are still there.
I sshed to look into the storage pool. my movie Folder was still there. So i deleted it via cli.
Now everything is a mess. The Folder was deleted but file Systems still Show the same as before.
list command inside media/68....../ gives me an error --> ls: lese Verzeichnis .: Eingabe-/Ausgabefehler
i tried to delete the share Folder via web gui ---> error
Failed to execute command 'rm -fr '/media/68d2700b-cee8-4a83-a30a-adaff0c45494/Public/' 2>&1': rm: Entfernen von „/media/68d2700b-cee8-4a83-a30a-adaff0c45494/Public/Filme“ nicht möglich : Das Verzeichnis ist nicht leer
i know its not empty but i hoped deleting the share (message states that it will delete all files inside the share) would clean my disks.
so now i cant Access the files which isnt a Problem but cant delete them either.
Did I destroy my System ? Do i have to Setup it again from scratch ?
I investigated myself a Little more.
Inside the media Folder the ls command Shows that there are several Folder with cryptic name.
Each of them contains Public/Filme/ Folder . So the files are still there.
thx seems to work. I read this before but wasnt sure what this command does . So i didnt want to use it. Nevermind I guess no one would advise stuff which would cause data loss.
No Sir. I am not norsk but I like the Norse mythology and stuff. 
I have a problem with my omv test system & the auFS plugin.
I am using 8*1 TB Drives for data. 7 of them are in the aufs pool. I installed snapraid plugin too but only added the drives. No sync at this point.1 Drive is for parity
So my problem is I setup the pool and and ftp. I started filling up my drives with all the data from my windows machine, but only one drive was filled to the point of 0.0 bytes free. FTP gives me errors now : no free space availabe. But Aufs shows 5 tb + free on the pool.
Ftp share is a folder inside the pool /Storage/Public
Storage is my pool. Public is my folder inside it.
Bottom line is there is no balancing in my pool and i cant add any more data.
What can i do for making it work ?
PS. : I know that ftp is not the best way for data migratio to the new system but rsync was horribly slow ( 8 MB/s ). I dont want to wait 3 weeks until all of my 5 tb are transfered. Any other suggestions ?
Thanks adam. I am sittig here googling my a** off because plex interface is not showing up. The adress you posted works. Finally !
@tekkb It worked like you said. Didnt rly have a clue what to type in Group and Name but gave it names. Miracally the PMS Client tab works now.
Tekkb your rly are the best at explaining things to total noobs like me 
Thx for the quick answer. I was looking for SSD´s today.
I saw there are msata SSD´s available with an msata to usb3 adapter.
But as far as i know , the internal usb port of the n54l is USB2 only.
Does an usb2 port has enough power for a msata drive?
Hi guys,
Im the new one ;). Already googled it but couldn´t find an answer for my problem.
I have a N54L Microserver currently running on windows 8 and planning to move to omv for several reasons.
I want use all 6 Sata Ports for Data HDD´s. The N54L has an internal usb port which i want to use with a SSD (Samsung or Intel) and an adapter from sata to usb. The SSD would be my OS drive.
Could that work?
I know that usb thumb drives dont work cause of short lifetime.
If it works could i use the usb cable for Data transfer and the normal sata power connector for powering the drive?
Greetings
