Beiträge von audiocrush

Any chance to disable it using cli?
The webinterface is deadslow and I get tons of timeouts/communication errors etc.
By the way the problem seems to increase over time.
I have to kill omv-engined, otherwise my Goflex machines become completely unresponsive and don't even answer my ssh connection requests
I think rrdcached doesn't perform very well on armel architecture.
But collectd and watchdog also commit a large slice to the problem.

*edit*
wow it worked!!! Thank you so much
I have temporarily added a swapfile to be able to make omv-engined run long enough without being killed
Then I was able to disable monitoring using the webinterface and a lot of patience
Now average cpu load dropped from 9.07 to 0.09

Hi there,

I've just set up two goflex net systems with omv 2.2.9 and debian wheezy.
Everything works really great except for one problem which makes it basically a showstopper.

rrdcached is causing extremely high cpu and memory load. this happens to such an extent that services like samba or php5-fpm get killed at random times.
does anybody know how to disable it?
as far as I know it is not a mandatory system service but if I try to disable it, it tells me that other processes are depending on it.

thank you in advance for helping me out

Hi,

I'd like to switch form freenas to openmediavault and I wanted to test the zfs funcitonality right now.
I found that zpool creation seems to take quite some time is that true?
I wanted to create a raid-z1 out of 4x3TB hard drives.
Just started the creation process and when I look into htop on the terminal I don't see any processes that could be creating something.
However nothing appears in the web gui as well.
Am I missing something here?

*edit*
Hardware:
HP Proliant N54L
4x3TB Seagate desktop 7,2k drives
System drive is a 30 GB kingston sata ssd
openmediavault is almost a clean install, no other plugins installed previously no other volumes created except the ones on the system drive

I just checked zpool events
Besides this from two hours ago, there is nothing shown.
resource.fs.zfs.statechange
resource.fs.zfs.statechange
resource.fs.zfs.statechange
resource.fs.zfs.statechange
ereport.fs.zfs.config.sync
ereport.fs.zfs.zpool.destroy
ereport.fs.zfs.config.sync

There is also no significant load on the system. CPU is between 0 and 1 % load all the time and the HDD led is blinking very rarely.

*edit2*
I just checked syslog:
There are 3 significant entries to the topic.
It says:
openmediavault zed: eid=5 class=config.sync pool=Main
openmediavault zed: eid=6 class=zpool.destroy pool=Main
openmediavault zed: eid=7 class=config.sync pool=Main

any idea why this is happening?
I also tried to create the zpool using force option but same result here...
I also have to reboot openmediavault and wipe the disks to add them to a new zpool again after another failed attempt. Otherwise they won't show up in the selection list.

*edit3*
I gave ZFS another go, I plugged 4x 8GB USB flashdrives in and created a zpool out of them, worked perfectly...
So where could be the problem with my 4x 3TB HDDs? Any Ideas?