Beiträge von greekleo

Zitat von subzero79

No idea. Search the TL faq maybe the client is banned but I doubt it. I also use TL with transmission 2.84 in Jessie vps which is the same binary from omv.
maybe the dns is not resolving properly what does nslookup tracker.torrentleech.org says?

you can also ask in their forums or read the faq if there is specific options to have In the client

Hello again.

I will try your suggestion, although i don't think i will get anywhere because it was working before the update, so the chances of TL requiring a change in the client around the same time as i did the update are slim.
This is what i get from nslookup.

Non-authoritative answer:
Name: tracker.torrentleech.org
Addresses: 94.242.253.20
217.23.12.105

Thanks

Grigoris

Zitat von subzero79

Try another torrent. You can pick from Debian torrents see if they work. Check your dns settings also.

here

http://cdimage.debian.org/debi….0-amd64-CD-2.iso.torrent

Hi,

Thanks for the suggestion. I have tried the torrent you have sent me and it is working. So what appears to be the issue. I have always downloaded from the same source (torrentleech.org) and i can download fine on my local machine but not through OMV. Is there a particular reason as to why this is occurring. and if so how can i fix it?

Thanks in advance

Hi Guys,

Since the update to Stone burner 2.2 my transmission plugin has stopped working. I haven't made any changes since the upgrade and i can say that it was working perfectly before. The error messages seem to be related to connection issues where it cant connect to trackers. I have tried the torrent files on my machine and they work straight away. Below are some example logs:

Apr 7 00:33:18 OMV transmission-daemon[2522]: Port Forwarding (UPnP) Port 51413 isn't forwarded (upnp.c:233)
Apr 7 00:33:18 OMV transmission-daemon[2522]: Port Forwarding (UPnP) Port forwarding through "http://192.168.0.1:1900/ctl/IPConn", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.0.100:51413) (upnp.c:279)
Apr 7 00:33:18 OMV transmission-daemon[2522]: Port Forwarding (UPnP) Port forwarding successful! (upnp.c:282)

Apr 8 18:06:31 OMV transmission-daemon[2522]: INE ALL IN ONE CCIE BUNDLE Could not connect to tracker (announcer.c:999)

Apr 8 18:13:21 OMV transmission-daemon[2522]: Port Forwarding (UPnP) Port 51413 isn't forwarded (upnp.c:233)
Apr 8 18:13:27 OMV transmission-daemon[2522]: Port Forwarding (UPnP) Port forwarding through "http://192.168.0.1:1900/ctl/IPConn", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.0.100:51413) (upnp.c:279)
Apr 8 18:13:27 OMV transmission-daemon[2522]: Port Forwarding State changed from "Forwarded" to "???" (port-forwarding.c:95)
Apr 8 18:24:01 OMV transmission-daemon[2522]: INE ALL IN ONE CCIE BUNDLE Scrape error: Could not connect to tracker (announcer.c:1282)
Apr 8 18:24:01 OMV transmission-daemon[2522]: INE ALL IN ONE CCIE BUNDLE Retrying scrape in 1830 seconds. (announcer.c:1291)

I have UPNP enabled on my router. I have checked all the ACL etc and they are all correct.

Any help in this matter i would appreciate it.

Regards

Grigoris

Looks like a reformat is due.

Yes i have. It was empty.

Hey David,

Sorry i wasn't clear enough. The data never actually moved because on the source drive it was still there. It is only on the target drive which is showing as occupied space of 400gb . Since then i have moved over the data again. So instead of showing 1.3tb being used it shows 1.7tb. ( 400gb from failed attempt) and 1.3tb from the second successful attempt. This baffles me because had the data partially moved over the first time then the source drive would have to read as 900gb. But it remained 1.3tb.

I hope this makes more sense!!

Hi Guys

This is my first post so i hope you are patient, i will write as much detail as i can.

I have a N40l server housing two of my 3x2tb drives. 2 are in raid0 and the other is seperated.

I had 1.3tb of data in the single drive and i SSH into the box and moved the data over to the Raid0 drives using the linux mv command.

My laptop turned off after four hours and only 400gb had been moved across, i kno this as thats what the gui showed. Although the data can not be seen physically on the target drive.

In a nutshell, the 400gb that 'Apparently moved' inowto be seen. it seems that it has claimed the space but no data is shown.

I have looked in /var/tmp and /tmp but nothing is there.

I basically would like to clean the raid drive so that it shows my true size.
i have other data in the raid drive so formatting isnt an option at this moment in time.

Thanks