Beiträge von abelicious

Hi everyone,

I have installed and used Couchpotato half a year ago and used it succesfully until recently. I think it stopped working when I updated CP. Now, whenever I click on the cp web interface button in OMV when the plugin is enabled it takes me to the error. I have not changed the port, it is still 5050. Today I reinstalled it, tried it failed. Reinstalled it tried to get back my backup and still fail. Do I need to remove my backup of CP settings to succesfully use CP again?

Does anyone have this problem as well and does somebody have a solution for it?

I am using the HP T5720 thin client with an Atom N280 on Linux 3.2.0-4-686-pae

Oh i see it now, sorry for the trouble.

Do you know how to delete any previously installed things? I want to reinstall the whole thing, so I rm -r seaFile, thus it should be gone, but I dont know if all installed things have gone away aswell.

That is really too bad ryecoaaron.. However if it will be too hard, do you have an idea how to move the data directory to a hard drive? Now when I install it, the data gets stored on the (limited) boot drive.

mv seafile-data /media//e7b7630c-7043-4fdf-8538-db4aee1e322d
will not work with my setup

I've seen in the wanted plugins page that they deem it difficult. The setup through ssh is okay to follow, but now I just need to find out how to store my seafile-data on a disk instead of boot drive...

This http://filipinjo.com/t/tutoria…aspberry-pi-or-ubuntu/188 tutorial is great aswell. Even has a youtube video if you cant acces your ip:8000 in browser, clear your cookies.

I vote for Seafile as OwnCloud alternative aswell. I read something about difficult to implement, but this seems to be the only mature Dropbox alternative.

That's possible, but also expensive I think. Maybe a more wallet friendly solution?

No I mean use a SATA II (on T5740) to eSATA cable.

Hey guys, do you have any idea how to add multiple hard drives? Since it only has one PCI (slow: 133MB/s) and one 22 pin powered SATA II (faster: 600MB/s) connection I am unsure what to do. Using the PCI expansion unit would not really be a good solution I think, because the PCI port is not really fast (or is 133MB/s a speed I will never reach anyway?). Splitting SATA does not work it seems, so would my only option left be to get an external drive enclosure with RAID integrated (Orico 3529rus3)? This I would connect to the SATAII port with a eSATA adapter cable.

What do you think is the best way to add 2 to 4 hard drives?

Hey guys,
In an attempt to save my future sd cards with omv (I have a Rasberry Pi) I installed the flash memory plugin.
However I don't understand how to fully install it. On the webgui flashmemory.png (see attachment) pops up. When I use putty and go into fstab I can not see how I can make such changes (see fstab.png)

Thanks

Any updates on this post?

I'm curious aswell to a way to last longer with SD cards, since every time I shut down the Raspberry Pi and later boot it again, the SD card seems corrupted.

I'd like to find a long term solution without formatting and writing an image daily
I have installed the flash memory plugin now and have created a thread with a question about it.

Thanks,
Abel

Thanks for the reply.

I can not believe this, you solved my problem in two sentences. I forgot to give specific users permission to open the folder. Now I can open it again. Thanks a lot!

Hey guys,

Since this is my first post and I've learned a lot through reading this forum. A big thanks to everyone working on this project and people responding on these forums.
Now I'll get to the point:

I can not acces my SMB shared files which are only accesible for users (so need a password). I am able to access SMB files which are shared with everyone (guests only) (see attachment #1 SMBopen)

I'll show you the steps I use when I try to connect to SMBclosed.
Step1: map network drive
Step2: enter first network password. Whatever I type, everything will get me through this step.
Step3: enter second network password. When I use admin + password it fails
Step4: when I use user + blank and when I use Jolan +password it fails too. I get three tries and then step5 pops up.
Step5: ... I failed again

Do you need any more information to help me solve my problem? Please ask!

My setup: Raspberry Pi B with Seagate 100gb HDD ext4.

Greetings from Amsterdam,
Abel