You don't say if your system is amd64 or not but the packages are here. If you did have an amd64 system, you would:
wget http://ftp.de.debian.org/debian/pool/main/w/wget/wget_1.16-1+deb8u1_amd64.deb
dpkg -i wget_1.16-1+deb8u1_amd64.deb
Of corse, my System is a 64Bit 
So I would try it on a Test-Sys, if this will work I will do this on my Live-Sys.
Thanks for your FirstAid!
Hi all,
I am running OMV 2.0 with Wget Version Wget 1.13.4
If I want to grab recursivly some File from a httpS-Server.
In case of verifying the certs, Wget uses a bump of Memory.
It will take ALL the available Ram.
How can I just update Wget to the most recent Version ?
My OMV2.0 runs fine - so I will not upgrade to 3.0
Yours
Atratus
--
DE
Hallo zusammen,
ich nutze OMV 2.0 mit Wget Version 1.13.4
Wenn ich damit recursiv Files von einem HTTPS-Server laden möchte, wird mein Ram von Wget aufgefressen.
Dies hat mit dem Verify der Certs zu tun. Wenn ich den Verify deaktiviere, läufts.
(Dies ist aber nicht Sinn der Sache.)
Es verbraucht allen verfügbaren Ram, bis Debian Wget killt.
Wie kann ich nur Wget auf die aktuelle Version updaten ?
Viele Grüße
Atratus
--
External Links:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=642563
Update page von debian:
https://packages.debian.org/search?keywords=wget
Hello everybody,
since there is some time ago since my last posting:
I just want to ask if there is any upgrade available to do a fresh install on deb jessi ?
i've tried to install stoneburner via the pinned "how-to install on deb" but this will not work 
Maybe you can chance the Posting to "will not work on Jessi!"
Install OMV on Debian via apt
thanks
Yours
Atratus
Hi all,
i just want to ask why my hard drive starts unexpected from standby while the system (OMV 1.19 (Kralizec)) is running.
I have adjusted the power down Time for the Hard Drive to 20 Mins.
It will spin down after 20 mins idle time, but sometimes it spins up, but there is no need for spinning up.
Has this to do with the broadcast from the windows clients ?
Can I block these broadcasts ?
I just want the Hard Drive to Spin Up just when i Access it (once a week to update my backups).
Is there in the OMV-Log's an information why the Hard Drive spins up ?
How can i set the Log to log why the HDD spins up ?
It hat just to do with the Energy consumtion and the Lifetime of the Hard Drive.
There is no need to run in normal mode, because i just use this Device to hold my Backups, nothing more.
It's not assigned / connected to any Computer.
Just the OMV is connected to a Network, and i just want to access the HDD once a Week to get my newest Backups...
Thanks for any suggestions (possible in german, too if you want to)
Yours
Andre
thanks, i've subscribed 
ok, thanks @ all.
I think i will a 2nd SD-Card with the Wheezy on it and downgrade my BaPi back to Wheezy.
So OMV wil run and i get a running Backup-NAS Back.
thanks
Where can i do a "Notify me if OMV is avaiilable for Jessi" ?
Tell Volker nice Greetings from me!
I don't NEED Jessi, but i have upgraded my wheezy to jessi, and now my OMV won't run
So, i reinstalled Jessi, and OMV won't run too
Unfortunately i don't have now a working Backup-NAS.
Now i'm thinking about my possibilities (reinstalling wheezy, try other software, do a risk and do nothing and wait until OMV 3.0 is ready)
That's why I am asking about the temporal forecast.
Nice answer, but it gives no forecast...
thanks.
can you give a perspektive, when OMV 3 will become available ?
Hi Guys,
i've just installed the newest Bananian (Jessie / Debian 8.1) Img.
Works fine.
Is there any new Information to install OMV on my Banana Pi ?
The Last Info was: impossible because SystemD...
Update available ?
Yours
Atratus
Hallo zusammen,
kann mir jemand vielleicht kurz erklären was es damit auf sich hat ?
-> "Dateioperationen auditieren"
vielen dank
Atratus
(Ob ich nun wirklich OMV 0.5 installiert habe, kann ich leider auf die schnelle nicht nachvollziehen. Es läuft jedenfalls sehr zufriedenstellend *g*)
