Posts by ildani

ildani · Feb 8th 2019

Quote from rithynic

Hi,
I have the same problem with folder2ram
Did you fix it ?

Hi, Yes.. it was a problem with my email config. I have configured "aspmx.l.google.com" and it was logging a lots of error - probably because I have installed pi-hole so it was blocking some domains. I switched to the normal "smtp.gmail.com" and everything was back to work normally.
I am not sure if it's the same in your case. You should monitor the config log and check what's logging and you can understand what the service is causing it.

ildani · Jan 28th 2019

Hi,
I am not sure why but i have always the /var/log full also if i am going to remove completely everything..

Code

root@openmediavault:~# df -l
Filesystem     1K-blocks     Used Available Use% Mounted on
udev             1963472        0   1963472   0% /dev
tmpfs             396492    40932    355560  11% /run
/dev/sde1       25584644  7269616  16992328  30% /
tmpfs            1982456        8   1982448   1% /dev/shm
tmpfs               5120        0      5120   0% /run/lock
tmpfs            1982456        0   1982456   0% /sys/fs/cgroup
tmpfs            1982456        4   1982452   1% /tmp
bonzo          672623872 41583360 631040512   7% /bonzo
bonzo/share    641463936 10423424 631040512   2% /bonzo/share
folder2ram       1982456  1982456         0 100% /var/log
folder2ram       1982456        0   1982456   0% /var/tmp
folder2ram       1982456      684   1981772   1% /var/lib/openmediavault/rrd
folder2ram       1982456     3520   1978936   1% /var/spool
folder2ram       1982456    10012   1972444   1% /var/lib/rrdcached
folder2ram       1982456       12   1982444   1% /var/lib/monit
folder2ram       1982456        0   1982456   0% /var/lib/php
folder2ram       1982456        0   1982456   0% /var/lib/netatalk/CNID
folder2ram       1982456      420   1982036   1% /var/cache/samba
overlay         25584644  7269616  16992328  30% /var/lib/docker/overlay2/46bbfee0bfae2a829ad7ace7dcccac6b179e17ce0636b7b1dc51c6c26a077bca/merged
overlay         25584644  7269616  16992328  30% /var/lib/docker/overlay2/74e9769242230ba1b149be449ab9ac84c80b9cb0383147a7aa0f0312e11048b5/merged
overlay         25584644  7269616  16992328  30% /var/lib/docker/overlay2/c5161db2c681c853fbd3ffae720c79dbe6ce270cea2849a8e0b480b086c8de2e/merged
overlay         25584644  7269616  16992328  30% /var/lib/docker/overlay2/7a57101ee946521d422b2faaca5c1d51ce21ec6b6a492a2f1b002ff892d0eef4/merged
overlay         25584644  7269616  16992328  30% /var/lib/docker/overlay2/3131bc1b340778d6837305f8064d50fcd3fc44d013f935ae793e3ccb139082e8/merged
shm                65536        0     65536   0% /var/lib/docker/containers/99d6ee317e64e054b2c87689a5f93bd7e824e2c1834b9c04a79f1ec5b63b5ea5/mounts/shm
shm                65536        0     65536   0% /var/lib/docker/containers/f5405f7383e0415c088b6f42b7b2b41dc30e58a61d5bf0fc0a6c7cf1bfaee22b/mounts/shm
shm                65536        0     65536   0% /var/lib/docker/containers/19c042a174723b802f4ce8e00fe7de1c9a6a6edce7fd47b5c14fd24fc1db9efb/mounts/shm
shm                65536        0     65536   0% /var/lib/docker/containers/77fefebf031da8d3ca7e9d195a7c22b4f744ecd73a704b76b7592f8670b08f32/mounts/shm
shm                65536        0     65536   0% /var/lib/docker/containers/250ae2cf799c1779dba1f2a08d96459aa453c23b689386b1e1b7428fa28b18c1/mounts/shm

Display More

I have always an email alert from anacron when it's trying to zip the log

Code

Anacron 
12:33 AM (11 hours ago)
to


/etc/cron.daily/logrotate:
error: Compressing program wrote following message to stderr when compressing log /var/log/nginx/openmediavault-webgui_access.log.1:


gzip: stdout: No space left on device
error: failed to compress log /var/log/nginx/openmediavault-webgui_access.log.1
error: Compressing program wrote following message to stderr when compressing log /var/log/nginx/openmediavault-webgui_error.log.1:


gzip: stdout: No space left on device
error: failed to compress log /var/log/nginx/openmediavault-webgui_error.log.1
run-parts: /etc/cron.daily/logrotate exited with return code 1

Display More

I am not sure why it's always full.. what can i check to understand it? Any clues? And also any possibility to resize the /var/log virtual space folder?

Thanks
Dan

ildani · Nov 25th 2015

Hi,
apt-get update from SSH and same from update manager:

Code

W: Failed to fetch https://dl.bintray.com/openmediavault-plugin-developers/stoneburner-sync/dists/wheezy/Release  Unable to find expected entry 'main/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file)


E: Some index files failed to download. They have been ignored, or old ones used instead.
root@OpenMediaVault:/opt# ^C

Code

root@OpenMediaVault:/opt# cat /etc/apt/sources.list
deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib non-free rpi
root@OpenMediaVault:/opt#

Old sources file? how to fix it?

Thanks
Dan

ildani · Nov 20th 2015

Hi!
quick question.. is it possible to replace the SD card from 16GB to 32GB without a reinstall? I didn't try it yet but I could do a backup and restore to the new SD.

Thanks
Dan

ildani · Aug 8th 2015

Quote from mikebetz42

Clear your browser cache, and disable all your addons... if it starts working again, enable an addon an continue.

Had the issue with Chrome... so far it seems to be working ok.

Many thanks. It worked!
Dan

ildani · Aug 7th 2015

Hi,
error:

Code

400 Bad RequestIllegal cookie name fntreeSaveStateCookie


Traceback (most recent call last):
  File "/opt/sickbeard/cherrypy/_cprequest.py", line 625, in respond
    self.process_headers()
  File "/opt/sickbeard/cherrypy/_cprequest.py", line 724, in process_headers
    raise cherrypy.HTTPError(400, msg)
HTTPError: (400, 'Illegal cookie name fntreeSaveStateCookie')
Powered by CherryPy 3.2.0rc1

i have tried to re-enable but nothing..

Many thanks
Dan

ildani · Aug 4th 2015

Quote from ryecoaaron

Disable the vdr repo in omv-extras. Do you have all of the repos enabled?

No not all.. I had VDR repo enabled. Disabled it and fixed.

Many thanks
Dan

ildani · Aug 3rd 2015

Hello,
error received after a simple refresh:

Code

Failed to execute command 'export LANG=C; apt-get update 2>&1': Ign file: Release.gpg Ign file: Release Ign file: Translation-en Hit http://debian.yeasoft.net wheezy Release.gpg Hit http://dh2k.omv-extras.org plex-wheezy-mirror Release.gpg Get:1 http://e-tobi.net wheezy Release.gpg [819 B] Hit http://packages.openmediavault.org stoneburner Release.gpg Hit http://debian.yeasoft.net wheezy Release Ign http://dh2k.omv-extras.org stoneburner-miller Release.gpg Hit http://e-tobi.net wheezy Release Hit http://ppa.launchpad.net precise Release.gpg Hit http://apt.syncthing.net syncthing Release.gpg Hit http://packages.openmediavault.org stoneburner Release Ign http://dh2k.omv-extras.org stoneburner-vpn Release.gpg Hit http://mirrordirector.raspbian.org wheezy Release.gpg Hit http://dh2k.omv-extras.org plex-wheezy-mirror Release Hit http://ppa.launchpad.net precise Release Hit http://mirrordirector.raspbian.org wheezy Release Hit http://apt.syncthing.net syncthing Release Hit http://dh2k.omv-extras.org stoneburner-miller Release Hit http://debian.yeasoft.net wheezy/main armhf Packages Hit http://archive.raspberrypi.org wheezy Release.gpg Hit http://dh2k.omv-extras.org stoneburner-vpn Release Hit http://www.greyhole.net stable Release.gpg Hit http://dh2k.omv-extras.org stoneburner-miller/main armhf Packages Hit http://archive.raspberrypi.org wheezy Release Hit http://packages.omv-extras.org stoneburner Release.gpg Hit http://www.greyhole.net stable Release Hit http://packages.openmediavault.org stoneburner/main armhf Packages Hit http://ppa.launchpad.net precise/main armhf Packages Hit http://dh2k.omv-extras.org stoneburner-vpn/main armhf Packages Hit http://mirrordirector.raspbian.org wheezy/main armhf Packages Hit http://ppa.launchpad.net precise/main Translation-en Hit http://apt.syncthing.net syncthing/release armhf Packages Hit http://archive.raspberrypi.org wheezy/main armhf Packages Ign http://debian.yeasoft.net wheezy/main Translation-en Hit http://mirrordirector.raspbian.org wheezy/contrib armhf Packages Hit http://dh2k.omv-extras.org plex-wheezy-mirror/main armhf Packages Hit http://packages.omv-extras.org stoneburner-testing Release.gpg Hit http://mirrordirector.raspbian.org wheezy/non-free armhf Packages Ign http://packages.openmediavault.org stoneburner/main Translation-en Hit http://mirrordirector.raspbian.org wheezy/rpi armhf Packages Hit http://packages.omv-extras.org stoneburner-plex Release.gpg Hit http://www.greyhole.net stable/main armhf Packages Ign http://archive.raspberrypi.org wheezy/main Translation-en Hit http://packages.omv-extras.org stoneburner-greyhole Release.gpg Ign http://apt.syncthing.net syncthing/release Translation-en Hit http://packages.omv-extras.org stoneburner-vdr Release.gpg Ign http://dh2k.omv-extras.org stoneburner-miller/main Translation-en Ign http://dh2k.omv-extras.org stoneburner-vpn/main Translation-en Hit http://packages.omv-extras.org stoneburner-btsync Release.gpg Ign http://dh2k.omv-extras.org plex-wheezy-mirror/main Translation-en Hit http://packages.omv-extras.org stoneburner Release Ign http://www.greyhole.net stable/main Translation-en Hit http://packages.omv-extras.org stoneburner-testing Release Hit http://packages.omv-extras.org stoneburner-plex Release Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en Ign http://mirrordirector.raspbian.org wheezy/main Translation-en Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en Hit http://packages.omv-extras.org stoneburner-greyhole Release Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en Hit http://packages.omv-extras.org stoneburner-vdr Release Hit http://packages.omv-extras.org stoneburner-btsync Release Hit http://packages.omv-extras.org stoneburner/main armhf Packages Hit http://packages.omv-extras.org stoneburner-testing/main armhf Packages Hit http://packages.omv-extras.org stoneburner-plex/main armhf Packages Hit http://packages.omv-extras.org stoneburner-greyhole/main armhf Packages Hit http://packages.omv-extras.org stoneburner-btsync/main armhf Packages Ign http://packages.omv-extras.org stoneburner/main Translation-en Ign http://packages.omv-extras.org stoneburner-testing/main Translation-en Ign http://packages.omv-extras.org stoneburner-plex/main Translation-en Ign http://packages.omv-extras.org stoneburner-greyhole/main Translation-en Ign http://packages.omv-extras.org stoneburner-btsync/main Translation-en Fetched 819 B in 12s (67 B/s) W: Failed to fetch http://e-tobi.net/vdr-experimental/dists/wheezy/Release Unable to find expected entry 'addons/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file) W: Failed to fetch http://packages.omv-extras.org/debian/dists/stoneburner-vdr/Release Unable to find expected entry 'main/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file) E: Some index files failed to download. They have been ignored, or old ones used instead.

also from command:

Code

W: Failed to fetch http://e-tobi.net/vdr-experimental/dists/wheezy/Release  Unable to find expected entry 'addons/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file)


W: Failed to fetch http://packages.omv-extras.org/debian/dists/stoneburner-vdr/Release  Unable to find expected entry 'main/binary-armhf/Packages' in Release file (Wrong sources.list entry or malformed file)

how can I update the sources.list file?

Code

GNU nano 2.2.6          File: /etc/apt/sources.list


deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib non-free r$

Many thanks
Dan

ildani · Jul 27th 2015

Quote from Mio

you want to add an harddrive that is connected to your router? i think that will be issue...
but you have in OMV option that calls Remote Shares under Services

Yes i know i was trying to use it.. but it's not easy because the router has a particular config.

Quote from KM0201

What model router? Is it safe to assume the router is sharing the drive via SMB?

Create a shared folder (under OMV). This is where the remote share will be mounted for use in the webUI.
Server IP (that's probably going to be the IP of your router)
Share Name... whatever your router names the share.
Shared Folder... the folder you created on OMV to mount the share.

That said.. is there any way you can just plug the drive into the USB port on your NAS?

The model is DGND3700v2 Netgear. It automatically maps the drive under this path \\192.168.0.1\remoteshare\USB_Drive and it's not possible to modify it. I have tried to add in all possible way with that path but it's not recognizing it (with the RemoteShare plugin). It says that is not a valid.

Code

Failed to execute command 'omv-mkconf remoteshare 2>&1': Retrying with upper case share name mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)

I can only mount it manually in ssh but it's not working in OMV.. I don't really know why..
No worries I will wait my new usb hub powered and I will connect it directly to the Raspi.

Many thanks
Dan

ildani · Jul 26th 2015

I'm trying me too to add an external drive mounted directly to my home router but without success.. it doesn't recognize the host..

ildani · Jul 26th 2015

Installed, enabled and configured. It was working.

ildani · Jul 25th 2015

Quote from ryecoaaron

It is restarted when the plugin is installed. Is it showing the error all the time? What plugins did you install? How old is the sd card? Are you connecting to it wirelessly?

Yes the error was continuing to popup.. but I uninstalled the nginx plug in and it seems come back to work normally.. not anymore errors..
Plug in installed: Plex, couchpotato, Mysql, wordpress,owncloud, bittorrent,pxe and the standard already installed by default.
Yes probably my SD is too old.. i need a new one more faster and bigger.. it's only 4GB..(saved from an old Blackberry)
I'm connected via cable..

ildani · Jul 25th 2015

ok.. but why is it restarted? I mean if it's going to restart all time I can't use it.. by the way I will uninstall it I don't need it right now.

Thanks

ildani · Jul 25th 2015

Hi,
I installed the last version of OMV to my Raspberry Pi 2 and I don't know why it started to give me this pop up error. I have installed some plugins..

Can you please let me know how to fix it? If needed i can post the logs.

Many thanks
Dan

ildani · Jul 25th 2015

Quote from ryecoaaron

I agree 100%. I never knew I couldn't do this until someone pointed it out. The only other way is manual. You could install the remotedesktop plugin and the login to the box and use the graphical folding installer supplied by stanford.

But if i'm going to install the remotedesktop plugin on my Raspi It will slow it down or not? The grafical interface will start automatically everytime i will power on the Raspi?

Many thanks
Dan

ildani · Jul 17th 2015

Quote from ryecoaaron

I stopped working on it because it is against stanford's rules <img src="http://forums.openmediavault.org/wcf/images/smilies/sad.png" alt=":(" />

Ah.. This is so bad.. Can't we do it in another way? I don't understand why.. We are using it for a good purpose..

Many thanks
Dan

ildani · Jul 17th 2015

Hi Guys,
anyone can help me to install it? I found it on github but i can't install.. maybe i'm doing something wrong.

Many thanks

Dan

Posts by ildani

Space not left for logs

Space not left for logs

Update error - Raspi2

[Rasp 2] SD 16GB replace it with an 32GB

Sickbeard error - 400 Bad Request

Sickbeard error - 400 Bad Request

Raspberry - error update

Raspberry - error update

Remote - share (Not working) HELP!!

Remote - share (Not working) HELP!!

[Raspberry Pi mod b] multiple popup error "An error has occured"

[Raspberry Pi mod b] multiple popup error "An error has occured"

[Raspberry Pi mod b] multiple popup error "An error has occured"

[Raspberry Pi mod b] multiple popup error "An error has occured"

openmediavault-folding install help

openmediavault-folding install help

openmediavault-folding install help