Posts by hawaix

    I redid the formatting
    I chose the xfs

    Code
    more /proc/mdstat


    Code
    Personalities : [raid6] [raid5] [raid4]
    md0 : active raid5 sdd[3] sdc[1] sdb[0]
    1953262592 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/2] [UU_]
    [===========>.........] recovery = 56.5% (552714368/976631296) finish=89.0min speed
    =79334K/sec


    now creating the raid 5 on 3 HD , right?

    I have done something wrong

    Code
    mdadm --detail /dev/md0


    thanks a lot ryecoaaron
    with these steps I create the raid 5 on 3 hd ? sdb , sdc , sdd


    I formatted the hd in ext3

    Code
    mkfs.ext3 /dev/md0


    Code
    blkid


    Code
    /dev/sda2: UUID="4566711b-bb01-4d17-9123-a58c14212d00" TYPE="ext3"
    /dev/sda3: UUID="cOKcBg-RgDG-Cxqg-7OoJ-Wbo2-ALA0-79Vks9" TYPE="LVM2_member"
    /dev/sdb: UUID="ceb857b2-f7a5-df4f-cdbb-487235e80956" UUID_SUB="38f22951-98fe-53ee-9294-755b546a9a62" LABEL="vnet:0" TYPE="linux_raid_member"
    /dev/sdc: UUID="ceb857b2-f7a5-df4f-cdbb-487235e80956" UUID_SUB="cb2a1188-6308-bd32-8736-bf59eb35bdfd" LABEL="vnet:0" TYPE="linux_raid_member"
    /dev/mapper/pve-root: UUID="cfbe9ae1-f171-4cc0-b61b-474586c83336" TYPE="ext3"
    /dev/sdd: UUID="ceb857b2-f7a5-df4f-cdbb-487235e80956" UUID_SUB="d13fbeaa-4cca-1a3a-ea54-4fb91b1b2c30" LABEL="vnet:0" TYPE="linux_raid_member"
    /dev/mapper/pve-swap: UUID="c9600c48-1819-47d4-b753-613d35e85ce4" TYPE="swap"
    /dev/mapper/pve-data: UUID="beb2f7c5-2de9-427b-b873-6dc7bf2f5ec4" TYPE="ext3"
    /dev/md0: UUID="77617804-f75d-4a50-b46c-6ce3e8ab50c1" SEC_TYPE="ext2" TYPE="ext3"


    now I have to add this line to fstab

    Code
    UUID="77617804-f75d-4a50-b46c-6ce3e8ab50c1 /media/md0 ext3 defaults,nofail 0 2


    right?

    Hello .
    On my server I installed Proxmox VE 3.2 (on 1HD 1TB) , and I decided to install it on raid5 (Software) so I have to add 3 more hd , ok done .
    I've read many guides but encountered some problems , I am aware that Proxmox VE does not support Software RAID (mdraid) Wiki
    the guide which I have tried to follow ,This refers to the version 3.1 , some command fails .


    Install mdadm

    Code
    apt-get install mdadm


    Code
    modprobe raid5


    Code
    fdisk -l


    Output


    in all the guides I found reference is made to the command sfdisk , but does not handle partitions GPT , so I have to use sgdisk right?
    how can I proceed, I need help
    many Thanks

    Hello guys
    I want to share my experience with owncloud , I dedicated many many hours to run on owncloud on OMV,it works but not very well . there are 20 days that I have installed on my system Proxmox and I virtualized a Virtual appliances of turnkeylinux.org , I downloaded the ISO file ownCloud ,
    and installed it on my server , is a version of debian 7.2 with owncloud,webmin,webshell,mysql, etc etc.. , is very fast, everything works You can also install it on VirtualBox .
    For the moment this is my alternative

    I never installed Proxmox , but now I want to do on my system because I noticed that virtualbox on OMV is slow (correct me if i am wrong) and I want to virtualize OMV and Zentyal Server 3.3 . My plan is to install Proxmox on ssd after creating the raid 5 (Software) is right :?: my idea is right or wrong?