Beiträge von Herschdorfer

i just had exactly the same issue.

strange that this popped up right now...

Zitat von HellDiverUK

I would certainly hope so! My NAS uses no more than 100W (idles at 30W) and it has 6 HDDs, two SSDs and a 6 core AMD CPU.

i'll measure the thing sometime and post the numbers here

Some more Information here on the Hardware:

Case: Cooler Master Elite 110 Black, Mini ITX Cube ~48€
Motherboard: Asrock Q1900, Celeron J1900 onboard 4x2.0 GHz ~80€
Power Supply: Super Flower Golden Green HX 350W ~50€
RAM: 2x 4GB Kingston KVR13LS9S6/2 DDR3L ~28€
HDD-Main: Samsung 750 EVO 120GB SSD ~65€
HDDs Storage: 2x Seagate NAS ST4000VN000 HDD 4 TB ~300€

TOTAL: ~570€

The links are going to Amazon but I bought the stuff a various shops, therefore the prices are also not the same as in Amazon.

This thing is now running 24/7 since two years.

I already started my build two years ago, but here are some pictures.

I had before two WD 2TB (WD2000FYYZ) inside, but recently one of them died and I switched the RAID to two 4 TB Seagate NAS (ST4000VN000)

I'm running OpenMediaVault 2.x and a seperate Apache installation for OwnCloud 8.x.
The cube is sitting behind my cable provider modem and is accessible via URL.

Also I have connected the TV and running XBMC. When OpenMediaVault 3.x is out i'll switch to the newer Kodi builds.

The processor is a Celeron quad core. The complete package uses less than 100 W, but I did not measure the correct numbers.

after swapping my RAID to new HDDs i also have the rrdcached 100% on one CPU. My version is 2.1.29.

Hey guys,

i'm facing the annoying problem that i have a hourly cronjob that i added manually to the crontab and omv is sending every hour a mail about the result of this.
Is there any easy way to deactivate this?

cheers

Hey guys,

i have an OMV installation (2.1.15) on a home server together with an separate installation of OwnCloud (8.1.3).
The reason why i'm not using the plugin for owncloud is that the current version is outdated and the sqllite DB is painfully slow.

Anyway, according to the OwnCloud manual, i wanted to improve performance on my server --> https://doc.owncloud.org/serve…r/performance_tuning.html
The needed module is in nginx-extras included.
So my first thought was just to install nginx-extras instead of nginx-full. BUT, if i apt-get this, the the dependencies want to remove OMV... crap.

sry for German:

root@omv:/opt# apt-get install nginx-extras
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  augeas-lenses avahi-daemon beep collectd collectd-core colord cron-apt dconf-gsettings-backend dconf-service gconf2 gdisk ifenslave-2.6 jfsutils libaugeas0 libavahi-core7 libcanberra-gtk3-0 libcanberra-gtk3-module libcap-ng0
  libcolord1 libcommon-sense-perl libdaemon0 libdbi1 libdconf0 libesmtp6 libfile-copy-recursive-perl libgtk-3-0 libgtk-3-bin libgtk-3-common libgusb2 libhal1 libieee1284-3 libjavascript-minifier-xs-perl libjs-extjs5 libjson-perl
  libjson-xs-perl liblocale-po-perl libmemcached10 libmodbus5 libnetcf1 libnl1 libnotify4 libnss-mdns libnuma1 libopenipmi0 liboping0 libopts25 libossp-uuid16 libprotobuf-c0 librabbitmq0 librrd4 libsane libsane-common libsane-extras
  libsane-extras-common libsnmp-base libsnmp15 libtokyotyrant3 libupsclient1 libvarnishapi1 libvirt0 libxenstore3.0 lvm2 monit nfs-kernel-server notification-daemon ntp php-json-schema php5-pam php5-proctitle proftpd-basic
  proftpd-mod-vroot python3-apt quotatool rrdcached rrdtool samba samba-common samba-common-bin sane-utils sdparm smartmontools snmpd socat tdb-tools tftpd-hpa update-inetd uuid wpasupplicant xmlstarlet
Verwenden Sie »apt-get autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
  nginx nginx-full openmediavault
Die folgenden NEUEN Pakete werden installiert:
  nginx-extras
0 aktualisiert, 1 neu installiert, 3 zu entfernen und 0 nicht aktualisiert.

Is there any solution for that, or do i have to screw up dpkg completely to solve this?

On the other hand, is it possible to insert nginx-extras as an optional package instead of nginx-full?

Best