Posts by Davidtt485

Tried the New 3.0 Beta, no changes and i am not quite good enough to try the new kernals, what kind of hardware would you suggest for a non raid setup.

I do and i did the check from this "lspci -v" and it showed the AHCI kernal was loaded, i will post this when i get home this evening (no remote access yet). also i did try disabling AHCI and going to IDE but the PC will not boot without a reinstall, and i use the hot plug feature and it works. The system is in a 24 bay chassis, it is 1/3rd filled and im hoping to find the issue before i fill it the rest of the way. Again i know your very busy i have read a million of your posts and i could not appreciate this help more.

sorry i just re ran it, again thank you for looking this over, looking at cpu and memory i do not see anything odd, i also tried adding more memory into the box and tried different memory no differences either.

and here is the other

root@NAS:~# dpkg -l | grep openm
ii  openmediavault                      2.2.3                          all          Open network attached storage solution
ii  openmediavault-keyring              0.4                            all          GnuPG archive keys of the OpenMediaVault                           archive
ii  openmediavault-omvextrasorg         2.13.2                         all          OMV-Extras.org Package Repositories for                           OpenMediaVault
ii  openmediavault-snapraid             1.5                            all          snapraid plugin for OpenMediaVault.
ii  openmediavault-unionfilesystems     2.3                            all          Union filesystems plugin for OpenMediaVa

I do not see anything out of the norm do you?

root 16712 0.1 0.1 153528 2852 ? S<sl May10 4:01 mergerfs /media
root 19697 0.0 0.0 0 0 ? S 06:35 0:00 [kworker/u8:1]
root 19740 0.0 0.0 0 0 ? S 06:40 0:00 [kworker/u8:0]
root 19806 0.0 0.2 224780 4608 ? Ssl May10 3:08 /usr/sbin/colle
999 19926 1.2 0.5 87432 11820 ? S 06:47 0:00 php-fpm: pool o
999 19935 0.9 0.6 89244 13560 ? S 06:47 0:00 php-fpm: pool o
root 19939 0.0 0.0 0 0 ? S 06:47 0:00 [kworker/0:0]
root 19944 0.0 0.0 0 0 ? S 06:47 0:00 [kworker/1:1]
999 19969 0.9 0.5 87452 11756 ? S 06:47 0:00 php-fpm: pool o
root 20041 0.0 0.2 9976 4164 ? Ss May10 0:00 dhclient -v -pf
root 20143 0.0 0.0 0 0 ? S 06:47 0:00 [kworker/u8:2]
root 20260 0.0 0.1 49956 3120 ? Ss May10 0:00 /usr/sbin/sshd
root 20272 0.0 0.0 0 0 ? S< May10 0:00 [bond0]
root 20308 0.0 0.0 21636 1208 ? S May10 0:00 udevd --daemon
root 20309 0.0 0.0 21636 1208 ? S May10 0:00 udevd --daemon
root 20484 0.3 0.2 72960 5448 ? Ss 06:47 0:00 sshd: root@pts/
root 20658 1.0 0.1 20008 3988 pts/0 Ss 06:48 0:00 -bash
root 20741 0.0 0.2 69836 4252 ? Ss May10 0:04 /usr/sbin/nmbd
root 20745 0.0 0.4 100680 8988 ? Ss May10 0:00 /usr/sbin/smbd
root 20770 0.0 0.1 100680 3844 ? S May10 0:00 /usr/sbin/smbd
root 20876 0.0 0.1 16852 2324 pts/0 R+ 06:48 0:00 ps aux
root 21636 0.0 0.0 0 0 ? S May10 2:04 [kworker/1:0]
root 22533 0.0 0.0 0 0 ? S May10 1:22 [kworker/0:5]
root 23058 0.0 0.1 20424 2056 ? Ss May10 0:00 /usr/sbin/cron
ntp 23117 0.0 0.2 41148 4252 ? Ss May10 0:17 /usr/sbin/ntpd

I almost thought that as well, but both the 2.5 drive and the SSD were clean installs, and the ram usage along with cpu usage is extremely low at idle. I will run this test when i get home this evening and report back, thank you so much for your guidance.

So I have been using OMV for a while and i really enjoy the product but i have come across a problem i cannot fix, I have searched everywhere including googling site:forums.openmediavualt.org. So my issue is poor internal disk performance and in result poor smb performance

Using test DD Conv=fdatasync if=/dev/sda(or B-F) of=/tmp/test.img bs=1G count=3

SDA(os) 15 mb/s tried with a known good 60GB SSD 53 mb/s
SDB-F 25 mb/s (2TB-3TB drives that show links capable of Sata II and Sata III)

I have checked everything in the hard drive sticky, and everything appears okay except most of drives do not show AA, but the AHCI Kernal is loaded and i am using the backport kernal.
My hardware was a AM3 MSI board with a Athlon 610e quad core, I than tried an Asrock FM1 board with an A4 3400 and i saw a small 10 m/b or so improvement. These are on Fresh installs, the amd64 version.

Here is where it gets weird, if i do an SMB transfer it sits around 30 mb/s or so but if I go into the OMV webgui and refresh my network graph it will jump upto 53-60 mb/s for a short period and than settle back down, i can keep clicking refresh and it will jump back up and stay there for 5-15 seconds.
I have a realtek nic as my primary but that is only used for management and i have a dual port intel nic that i use for actual data transfers, This nic is Bonded with a D Link DGS 1224T switch that is Layer2 Capable.

My next step is to buy a haswall board and cpu and try that but i am worried that i will end up with the same problems.

i am and i did on the previous page

root@Storage-PC:~# stat /media/dea8dc9a-3817-4869-bf55-f914da84071b
File: `/media/dea8dc9a-3817-4869-bf55-f914da84071b'
Size: 4096 Blocks: 8 IO Block: 4096 directory
Device: 12h/18d Inode: 2 Links: 20
Access: (0777/drwxrwxrwx) Uid: ( 777/ UNKNOWN) Gid: ( 0/ root)

i did use the guide but it did not work so than i tried to permit all

root@Storage-PC:~# stat /media/dea8dc9a-3817-4869-bf55-f914da84071b
File: `/media/dea8dc9a-3817-4869-bf55-f914da84071b'
Size: 4096 Blocks: 8 IO Block: 4096 directory
Device: 12h/18d Inode: 2 Links: 20
Access: (0777/drwxrwxrwx) Uid: ( 777/ UNKNOWN) Gid: ( 0/ root)

this option is checked.

Mine will not download new metadata and i have tired the command line

this is what id emby shows

uid=111(emby) gid=65534(nogroup) groups=65534(nogroup),100(users)