Posts by ivan.vaskevych

Disabling 'Honor existing ACLs' in smb share setting solved the problem for me.

Thanks!

Even with the plugin I get 1GB of writes per day. What's the easiest way to find what is to blame?

So the flash memory will die eventually to writes.

There is an option to extend the root partition to the whole flash card size. Will this help to redistribute writes? Or otherwise?

Thanks for help!

Problem solved guys, thanks!
I got a web console access and cleared the ssh way through it.

I think the problem with softy installation was due to NTP blocked by my ISP (don't ask...)
Couldn't apt diist-upgrade due to this as well.

I reduced the CPU clock but didn't check HDMI output yet.

Case closed.

Thanks @tkaiser, @crashtest for replies! Few things still missing to solve the problem:

1. Headless OMV. It seems that the OMV image doesn't allow ssh out of the box. Am I wrong?
2. Can't install it on armbian Stretch. armbian-config Softy install fails as below. Any idea why?
openmediavault-omvextrasorg depends on openmediavault (>= 4.0.4); however: Package openmediavault is not configured yet.

Answers to your Qs:
1. I meant HDMI cable
2. Yes, under-voltage shouldn't be an issue, though still can be if the image overclocks out of the box.
3. It was running for 1 year.
4. Checked the md5
5. Flash card is ok.

Hi,

I have a strange problem. The OMV (v. 4) was running fine on NanoPi M4, then SD failed.
Now...
1. I can't install it from image (different SD card, after SD card formatter and f3 checks):
No HDMI output, green light flashing. Waited for more than 2 hours. Bought Raspberry Pi power 5.1V 3A to address possible HDMI under-voltage. Changed HDMI cable. No luck.

2. Can't install it on armbian Stretch. armbian-config Softy install fails:
openmediavault-omvextrasorg depends on openmediavault (>= 4.0.4); however: Package openmediavault is not configured yet.

Two questions:
1. Am I doing something wrong?
2 Should I wait for OMV5 image maybe?