Posts by skylamon

  • Lost network speed in virtualbox vm's

    Hey,


    After the recent updates i found out that all my VM's are limited to 2mbit download speeds, yet upload is fine as perfect.
    Tried already restarting vm's and the host aswell, nothing changed.
    At host level it performes perfectly, 100mbit to internet and 1gig to lan, but inside VM speeds are limited to 2mbit only.
    Any suggestions?

  • Help a newb out with shares and cifs

    Thanks for reply,
    Made users, assigned each user their own share, but when im trying to change ACL,i get this error :


    Failed to execute command 'export LANG=C; setfacl --remove-all -M '/tmp/setfacleZjHB1' -- '/pool/backup/user2/' 2>&1': setfacl: /pool/backup/user2/: Operation not supported
    Error #4000:exception 'OMVException' with message 'Failed to execute command 'export LANG=C; setfacl --remove-all -M '/tmp/setfaclp4Ef1p' -- '/pool/backup/user2/' 2>&1': setfacl: /pool/backup/user2/: Operation not supported' in /usr/share/openmediavault/engined/rpc/sharemgmt.inc:1220Stack trace:#0 [internal function]: OMVRpcServiceShareMgmt->setFileACL(Array, Array)#1 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)#2 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('setFileACL', Array, Array)#3 /usr/sbin/omv-engined(500): OMVRpc::exec('ShareMgmt', 'setFileACL', Array, Array, 1)#4 {main}

  • Help a newb out with shares and cifs

    So what am i trying to do here now is, to have a 1 main folder called Backups and inside that folder each user has their own folder where windows backups automatically uploads their files.
    It goes like this :
    Backups/User1
    Backups/User2
    Backups/User n...
    But i dont want any of the users be able to write/read into other users folders, this is mainly because of anykind of malware(ransom) etc..


    So help a newb out, how to create a system like this?
    Atm, i have created all of the users and share folder inside the backup folder for them.
    But all users are able to see all the other users files aswell.

  • Unhandled error code, DID_BAD_TARGET

    Hello,
    One of my servers suddenly started to show this error msg on SysLog


    Server is : Dell PowerEdge T430
    Intel Xeon E5-2620 v3
    32GB memory
    1 Samsung 840 EVO 250GB
    6x 4TB WDC RED
    Filesystem : ZFS Raid-Z2
    Kernel : 2.2.13 (Stone burner)
    RaidController : Dell Perc h330


    I checked every drives SMART and they are perfect cleans, no crc errors or any kind :
    1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
    3 Spin_Up_Time POS--K 181 180 021 - 7925
    4 Start_Stop_Count -O--CK 100 100 000 - 14
    5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
    7 Seek_Error_Rate -OSR-K 200 200 000 - 0
    9 Power_On_Hours -O--CK 087 087 000 - 10075
    10 Spin_Retry_Count -O--CK 100 253 000 - 0
    11 Calibration_Retry_Count -O--CK 100 253 000 - 0
    12 Power_Cycle_Count -O--CK 100 100 000 - 14
    192 Power-Off_Retract_Count -O--CK 200 200 000 - 12
    193 Load_Cycle_Count -O--CK 200 200 000 - 214
    194 Temperature_Celsius -O---K 119 111 000 - 33
    196 Reallocated_Event_Count -O--CK 200 200 000 - 0
    197 Current_Pending_Sector -O--CK 200 200 000 - 0
    198 Offline_Uncorrectable ----CK 100 253 000 - 0
    199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
    200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0


    Im clueless now what to do, or is it just a omv sided issue?

  • Unable to install, no disk drives found

    So im switching over from old athlon computer to a new server grade machine :
    Dell PowerEdge T430
    Intel Xeon E5-2620v3 6c/12T
    32GB DDR4 ECC 2133MT/s
    Dell PERC H330
    6x4TB WDC Red NasWare HDD
    2xGbit network


    And problem is that current Stable version, isnt detecting any HDD attached to the machine.
    All drives are on NON-Raid passthrough mode
    Does it things, asks for root password to setup, lan etc etc and when its should detected the disks, its goes red and gives error : No disk drives found.


    So i googled a bit, and some suggested using plain debian and then install omv on top of it. Turns out Debian 7 cant see any of my drives either, but Debian 8 can. The forum people here say, "Dont even try to install it on Deb.8" So what now? Sticky stuck situation


    So i tried to use the current BETA version and voila, drives are found and can be used. But then soon stumbled on multiple problems.
    1. After doing "updates" it breaks itself, no longer can search any updates
    2. Under plugins there are critical plugin missing : VirtualBox that i need.
    3. ZFS plugin is missing too.


    So any way to solve any of this?