Dashboard

Ungelesene Themen

    1. Thema
    2. Antworten
    3. Letzte Antwort

    2. OMV on ugreen HW. When CPU long time high, system is unresponsive 5

      • kattivius
    3. Antworten
      5
      Zugriffe
      171
      5

    4. jata1

    2. Various installs gone very wrong (6, 6.5, 7.4) 7

      • DesTheRed
    3. Antworten
      7
      Zugriffe
      171
      7

    4. DesTheRed

    2. Bridge network for KVM (HA)? 3

      • BigWinnie
    3. Antworten
      3
      Zugriffe
      120
      3

    4. erbsenzaehler

    2. newbie, just did a raid 5. resyncing time question

      • chrisb62
    3. Antworten
      0
      Zugriffe
      31

    2. v6 to v7 update not working due to "archive"-repos, causing dependency issues

      • Phil_30
    3. Antworten
      0
      Zugriffe
      49

Letzte Aktivitäten

  • jata1

    Hat eine Antwort im Thema
    • OMV 7.x
    OMV on ugreen HW. When CPU long time high, system is unresponsive verfasst.
    Beitrag
    Have you tried adding a cpu limit to the compose?

    Example below. Plenty of info on this stuff on internet.

    Worth a try to see if that prevents the cpu overloading

    (Quelltext, 14 Zeilen)

  • DesTheRed

    Hat eine Antwort im Thema Various installs gone very wrong (6, 6.5, 7.4) verfasst.
    Beitrag
    Good points,

    I actually did #1 about a week ago. Along with a full clean up of the heat sink and fan. They were choked up. And the CPU was dry.

    Seems that I’m destined to finally trash some components.

    Thanks

  • crashtest

    Hat eine Antwort im Thema Various installs gone very wrong (6, 6.5, 7.4) verfasst.
    Beitrag
    […]

    Depending on age, your CPU might need to have it's thermal grease replaced (several years may dry out OEM grease). Also the heat sink / fan might be clogged with dust, etc.

    Depending on age, you may have electrolytic capacitors drying out on the…

  • DesTheRed

    Hat eine Antwort im Thema Various installs gone very wrong (6, 6.5, 7.4) verfasst.
    Beitrag
    Thanks macom,

    I tried the ping to Debian, no packet loss.

    I installed memtest86 on a USB and set the bios to boot from USB, mb won’t recognize the USB (tried several ports) and eventually boots into OMV and then hangs occasionally.

    I’ll try and get…

  • erbsenzaehler

    Hat eine Antwort im Thema Bridge network for KVM (HA)? verfasst.
    Beitrag
    It won't hurt trying to use the built vpn method of your router. You won't need the bridge network as you're then directly "talking" to the vm and not trying to talk from omv to the vm.

  • chrisb62

    Thema
    ive setup an omv vm thru proxmox and passed thru three 4tb partitions, following a guide on youtube. setup raid 5 with ext4 file system with smb shares.
    using this video, if it helps. youtu.be/Bce7VT3kJ4g?si=arDVe8Qzj37Achf1


    is that a normal amount of time…

  • Phil_30

    Thema
    I finally managed to update from v5 to v6 (see my previous thread for info about that).
    After confirming that it updated successfully, I ran another omv-upgrade, but that has problems with the "archive.debian.org" repositories.
    Also due to that …

  • Phil_30

    Hat eine Antwort im Thema
    • OMV 5.x
    • gelöst
    • Upgrade 5.x -> 6.x
    OMV5 to OMV6 in-place update fails with exit code verfasst.
    Beitrag
    Gonna open a new thread for the update to version 7 now.
    Having new problems...

  • Phil_30

    Hat eine Antwort im Thema
    • OMV 5.x
    • gelöst
    • Upgrade 5.x -> 6.x
    OMV5 to OMV6 in-place update fails with exit code verfasst.
    Beitrag
    Update:
    After reverting to the backup with OMV 5 I changed the deps in
    (Quelltext, 1 Zeile)

    To stable-release again.
    I could then do a omv-upgrade and then a omv-release-upgrade and was on OMV 6 without a problem.

    I have no clue why that did not work the…

  • BigWinnie

    Hat eine Antwort im Thema Bridge network for KVM (HA)? verfasst.
    Beitrag
    […]

    I have also VPN possibility in my router I think (Asus Expert Wifi EBG15), but probably it would't help my problem, since I've already tried WireGuard and Tailscale. I think it is a network issue related to the VM (bridge network). Using Nabu Casa…