Dashboard

Ungelesene Themen

    1. Thema
    2. Antworten
    3. Letzte Antwort

    2. Paths in Kubernetes recipe 1

      • medved
    3. Antworten
      1
      Zugriffe
      9
      1

    4. ryecoaaron

    2. OMV8 omv-release-upgrade error (NUT) 13

      • yestothis
    3. Antworten
      13
      Zugriffe
      225
      13

    4. ryecoaaron

    2. Every time i replace a drive mdadm doesnt see my raid and i have to stop and forcefully rebuild via console 2

      • Darkyputz
    3. Antworten
      2
      Zugriffe
      24
      2

    4. Darkyputz

    2. FTP not working after OMV 8 update 1

      • shadypt
    3. Antworten
      1
      Zugriffe
      64
      1

    4. shadypt

    2. omv-upgrade error after update to 7.7.24 8

      • prtigger1
    3. Antworten
      8
      Zugriffe
      73
      8

    4. prtigger1

Letzte Aktivitäten

  • ryecoaaron

    Hat eine Antwort im Thema
    • OMV 7.x
    Paths in Kubernetes recipe verfasst.
    Beitrag
    A device path (anything starting with /dev) should never be a path you use to write files. You want the device's mountpoint which is in the filesystems or sharedfolders tab.

  • ryecoaaron

    Hat eine Antwort im Thema
    • OMV 8.x
    • gelöst
    • Upgrade 7.x -> 8.x
    OMV8 omv-release-upgrade error (NUT) verfasst.
    Beitrag
    […]

    Runs a test script to make sure the plugin is doing what it should. The output should tell you exactly what it is doing. I actually thought about getting rid of the button because the test button was really for me when developing the plugin. The…

  • medved

    Hat das Thema
    • OMV 7.x
    Paths in Kubernetes recipe gestartet.
    Thema
    Hello to everybody! I'm a newbie in Linux.
    I'm using openmediavault 7.7.24-1 (Sandworm). I have small SSD as /dev/sda and 4 HDDs (sdb-sde) in RAID5 as /dev/md0. I set up a file share there with the name RAIDShare, it works fine, visible from my local…

  • yestothis

    Hat eine Antwort im Thema
    • OMV 8.x
    • gelöst
    • Upgrade 7.x -> 8.x
    OMV8 omv-release-upgrade error (NUT) verfasst.
    Beitrag
    Thanks again for this you two. Keep up the great work!

    Ryecoaaron, what does the test button do? I clicked it and it seemed to have crashed my Docker session. I just want to make sure it’s working and maximizing the NVMe lifespan.

  • Darkyputz

    Beitrag
    ok, i am just used to other systems where it would see a degraded raid after reboot and ask to get a new drive. Wasnt expecting that it does not even see the raid at all. Especially when only one out of 6 drives got swapped.
    But good to know. At least i…

  • shadypt

    Hat eine Antwort im Thema
    • OMV 8.x
    FTP not working after OMV 8 update verfasst.
    Beitrag
    Fixed.
    After reading logs and with the help of AI all I need to do was run "sudo apt install proftpd-mod-crypto"

  • votdev

    Beitrag
    This is no bug, this is how mdadm works. You can try to add the new disk as hotspare before removing the disk that is to be replaced. To keep it short, the mdadm support in OMV does not do any magic for you.

  • Darkyputz

    Thema
    Hello everyone.
    I am in the process of making my raid bigger while.keeping the data, so i replace all my 1 tb drives one by one with 3 tb drives and rebuild the degraded raid. But to do so i always have to stop my md127 mdadm and restart in the console…

  • prtigger1

    Hat eine Antwort im Thema
    • OMV 7.x
    • gelöst
    omv-upgrade error after update to 7.7.24 verfasst.
    Beitrag
    votdev
    Thank's for your great work on this project!

  • cubemin

    Reaktion (Beitrag)
    […]

    If you attempt it, you'd be well served by cloning your boot drive, testing the clone, then running the upgrade attempt on the clone. As gderf has indicated, there's a good chance the process will fail. With that many upgrades, I'd put the chance…