autoshutdown für omv 2.1

    Hi,
    irgendwie finde ich autoshutdown für omv 2.1 nicht, habe es noch unter omv 1.9 gerne benutzt....
    KAnn mir jemand helfen?
    Gruß,hl

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

    Hi,
    nein, weil ich extras für 2.1 nicht gefunden habe..
    gruß, hl

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

    HI,
    nun habe ich den autoshutdown eingebunden, omv funktioniert tabellos,
    ABER kein WebUI mehr da, auf omv-firstaid/pw KEINE Reaktion,einfach nur ein NAS ohne WebUI...
    wat nu?
    Gruß, hl

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

    Hi all,
    ich brauche dringend Hilfe, da ich jetzt mein omv ncht mehr "sehe": WebUI ist nicht mehr erreichbar!
    Ist niemand da?
    Gruß, hl

    OMV 2.1
    AN EXAMPLE HOW OLD PC PARTS CAN BE USED:
    Fujitsu-Siemens P5915 (Motherboard D2151-A21), Intel C2D E6600, 4,0 GB DDR RAM, 3Ware RAID controller on PCI slot, up to 6 HDDs in total can be installed due to case changes (currently 2x1tb in RAID1 mode on the board as "holy backup" share & 2x1tb as regular share on 3Ware, one 2tb as storage for two easyVDRs & one 320gb for OMV and ownCloud share), power consumption about 100 Watts (this is OK for that setup...)


    OMV switched on automatically per wol when main PC is switched on...
    OMV switched off per autoshutdown if no IP traffic on main IP over 10 minutes...

    Hi Heinz,


    log dich auf dem NAS via SSH ein (unter Windows kannst du dafür das Tool Putty nutzen)
    und prüfe ob der nginx Service läuft.

    Code
    service nginx status


    ist dies nicht der Fall starte den Service

    Code
    service nginx start


    Gruß usr445

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden