I can't get virtualbox (OMV 2.1, Virtualbox 4.3) to show / pass trough usb devices; the filter-list in web configuration is just empty
Any help would be much appreciated
fhatz
I can't get virtualbox (OMV 2.1, Virtualbox 4.3) to show / pass trough usb devices; the filter-list in web configuration is just empty
Any help would be much appreciated
fhatz
What "devices" are you trying to pass through? Please tell us more about what you're trying to share with a VM.
I try to pass trough a 'CUL_V3' device. This is a RF receiver / transmitter. However, my problem is that I can't see any of the usb devices connect to the host in the list of phpvirtualbox
Output of 'VBoxManage list usbhost'
-------------------------
Host USB Devices:
UUID: 534cf5f3-4bc7-4cbb-94c0-19dd4fbd90c7
VendorId: 0x03eb (03EB)
ProductId: 0x204b (204B)
Revision: 0.0 (0000)
Port: 3
USB version/speed: 1/1
Manufacturer: busware.de
Product: CUL868
Address: sysfs:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4//device:/dev/sundtek/usb/001/008
Current State: Busy
---------------------------------
fhatz
I found a solution:
I changed the user of phpvirtualbox to 'root'
The problem was the installation of a DVB-Stick ('Sundtek'), changing the adress of usb devices. Using root as web user, everything works fine...
I don't recommend that method. You probably just needed to add the vbox user to a group that can access usb.
I don't like running phpvirtualbox as root. However, a sundtek-dvb-stick is installed. Therefore, the path to all loaded usb devices is changed and I couldn't find the place for modifying the permissions (permission = root:root).
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!