hello
I have an APC UPS connected via usb smartups 750
I also installed the plug-in nut.
when I active services / UPS
I show the following options:
[Ups]
driver = usbhid-ups
port = auto
but I have an error message:
Error # 4000:
exception 'OMVException' with message 'Failed to execute command' sudo UPSC ups 2> & 1 ': Error: Driver not connected' in / var / www / openmediavault / rpc / nut.inc: 133
Stack trace:
# 0 [internal function]: NutRpc-> getStats (NULL)
# 1 / usr / share / php / openmediavault / rpc.inc (265): call_user_func_array (Array, Array)
# 2 / usr / share / php / openmediavault / rpc.inc (98): OMVRpc :: exec ('Nut', 'getStats', NULL)
# 3 / var / www / openmediavault / RPC.php (44): OMVJsonRpcServer-> handle ()
# 4 {main}
when I did a dmesg on the server I see my UPS to connect:
[4067.551331] generic-usb 0003:051 D: 0002.0003: hiddev0, hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 750 FW: 651.13.I USB FW: 7.3] on usb-0000: 00:1 d.2 -1/input0
[5992.576050] usb 4-1: USB disconnect, address 4
[6029.424017] usb 2-2: new low speed USB device using uhci_hcd and address 2
[6029.672054] usb 2-2: New USB device found, idVendor = 051D, idProduct = 0002
[6029.672059] usb 2-2: New USB device strings: Mfr = 3, Product = 1, SerialNumber = 2
[6029.672063] usb 2-2: Product: Smart-UPS 750 FW: FW 651.13.I USB: 7.3
[6029.672067] usb 2-2: Manufacturer: American Power Conversion
[6029.672070] usb 2-2: SerialNumber: AS0806220977
[6029.672208] usb 2-2: configuration # 1 chosen from 1 choice