So I'm new to RAID, NAS and Linux but proficient in general Windows-based computing. I'm hoping some nice people would point me to certain things to try so I can learn anything considered must-know or at least good-to-know.
I've installed OMV 3.0.89 and have it running fine with a share that I've successfully mapped as a network drive on my Windows PC.
Setup is a Poweredge R510 with a Perc H700 (I'll be switching this out for an IT flashed H200). OS is installed on a 64GB SSD and have a RAID0 (2x160GB HDD), RAID5 (4x1TB HDD), RAID6 (5x1TB HDD) and a Hot Spare (1x1TB HDD).
Current hardware and config is all temporary for testing/learning. Once I have a backup solution I'll start on the real NAS (64GB SSD for OS and 8x10TB HDD in RAID6).
I'm not expecting guides or deep posts, something like "Try X" or "Play around with x" will probably do...possibly maybe?