Hi there every one
I'm a new member here and just had a few questions i thought would be good to ask here.
I have used OMV be for but only on a 100mbps router with no problems what so ever. Recently i have upgraded my home network with new routers so i have 1gbps ports all round.
The version of OMV i am running is 3.0.86 Erasmus and is installed on a ACER Extensa 4230 laptop hooked up via Ethernet to one of my linksys WRT-610n 1GB ports, and my windows 10 rig to one of the other 1GB ports on the same router.
The ACER laptop has a 600gb 5400 sata 2 drive in it and has a gigabit Ethernet adapter im sure of it, same for the windows rig. i have a shared folder setup for the HDD using SMB, the trouble im having is im only getting 100mbps transfer from the windows rig to the OMV laptops hdd.
My thought on it was that i would be pushing somewhere between 500 to 1000mbps but no mater what i do i cant get it past 100mbps.
Am i simply asking to much of this version of OMV ? or is there some form of setting i can set to change this.
Just to add , the WRT-610n that the lappy and pc are connected to links into a vlan port on a second WRT-610n as i use it as a DHCP server for my vlans. both routers run a 3rd party firmware called DD-WRT and i am almost 100% sure they they configured for 1gbps speeds.
I have seen similar post to mine but i couldn't find a solution.
Any help would appreciated.
Cheerz
Stephen