its getting crazy i think it says it pre-depends on dpkg, which is not installed...
Error from 0.2.7.4 to 0.3
-
-
I was afraid of that... Any network adapter will do. Even if it is slow, you could install the drivers for the other adapter.
-
yea i just bought on amazon this:
"D-Link DGE-528T Gigabit Ethernet Adapter, 1000/100/10MBit, PCI Bus 2.2, 32 Bit"
its says it works with linux^^btw if you could be so kind and tell me how i connect to the omv server when the new network card arrives?
-
How do you want to connect? I assume you want to transfer files? If so, I use scp which copies files over ssh. You could also mount a samba share.
-
well the omv server uses smb share so it would be nice if i could use this connection. how can we realize this in parted magic :D?
-
mkdir -p /mnt/omv
mount -t cifs //omv-ip-address/sharename /mnt/omv -o username=teasle -
thanks so much!!!!!! it finally works thank you rly for your help!!! gimme your donation link^^
-
Glad to hear No donation needed unless you want to donate to OMV/Volker (he has a link on the omv home page)
-
a new problem came up.
I wanted to boot the server after some downtime and now it wont boot correctly.error: failed (code8)
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed...
The root filesystem is currently mounted in read-only mode...i can login in root and reboot. what can i do to fix that? thanks!
oh and when i loged in with my rootPW and did the fsck, it said fsck.ext4 for device /dev/sdd1 exited with signal 11.
-
Code 8 is an operational error. Any errors in /var/log/messages?
-
ehm there is no error in the message file. on july 23. i was shutting down the system with signal 15. thats all
-
Drive might be failing. What kind of drive?
-
well omv is installed on an usb key 8gb and i got 3x4tb hdds in the system(raid5)
whats weird is, if i type fsck it try to do it for the dev/sdd1 and it says 199 days without being checked... maybe it has to do with my switching of the harddrives? i didnt unmounted the old ones, as u said but when the system worked fine i did it afterwards in the gui. could that be the problem?
i also tried this : http://phpbb.openmediavault.org/viewtopic.php?f=3&t=1465
but the system is read-only so i cant edit anything...
-
Your usb key is the problem. We recommend highly against using them. The filesystem is probably has errors now so I hope you have a backup. Otherwise, you will probably need to reinstall omv. You data on the hard drives won't be lost though.
-
oh thats bad... well then i will buy a little sdd and use this for the system. thanks anyways
edit: thanks i got a sdd and its working fine again :D!
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!