Hi all,
I searched and searched, but was surprised I couldn't find any information on what issue I'm facing.
At any given time I have 24 or more LVM volumes on my OMV rig. Most of these need to be attached to iSCSI LUNs. After a fresh install of OMV (currently 2.2.13) the system recognizes my old LVM volumes and when I go to reconstitute my iSCSI luns: iSCSI>Targets>Add>Lun>Add>Device. The system appears to be polling available volumes for qualified options, but after about 20 seconds it returns:
Gateway Timeout.
In what I could search out on timeouts, I tried adding OMV_HTTPREQUEST_TIMEOUT=180000 to /etc/default/openmediavault and /etc/nginx/sites-available/openmediavault-webgui to fastcgi_read_timeout 120s, to no change
Is there another place I can increase that Timeout?
Because I'm happy to wait. My only other recourse is to dump a bunch of volumes, make a slew of dummy targets, and then hack configs from the commandline to add devices, which isn't hard, but a titch less convenient.
Not sure if it matters, but the LVM volumes lay atop physical members that are Raid6/5.
--------------
Setup:
AMD A10-7800
32gig ram
22 internal drives in raid6/5 mixes