Hello,
I just installed OMV 4 on my rock64-2GB. I downloaded the image from https://sourceforge.net/projec…ngle%20Board%20Computers/
The system seems to be stable but the usb3 speed connection seems to be very slow.
I'm currently using a usb3 WD Elements XFS formatted;
Here are some console outputs:
lusb:
Code
lsusb
Bus 005 Device 002: ID 1058:25a1 Western Digital Technologies, Inc. Elements / My Passport
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code
lsusb -t
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
fstab:
Code
# >>> [openmediavault]
/dev/disk/by-id/usb-WD_Elements /srv/dev-disk-by-id-usb-WD_Elements xfs defaults,nofail,noexec,usrquota,grpquota,inode64 0 2
# <<< [openmediavault]
dd:
Code
dd if=/dev/zero of=/srv/dev-disk-by-id-usb-WD_Elements/test1.img bs=100M count=1 oflag=direct
1+0 records in
1+0 records out
104857600 bytes (105 MB, 100 MiB) copied, 38.9054 s, 2.7 MB/s
I tested the same drive with my laptop and I was able to get at least 80MB/s. Also with OMV on the RPi it was a lot faster.
The maximum I can achieve with the Rock64 is 3.8MB/s
Connecting the hdd to the usb2 ports I get 3.7MB/s
I tried searching the forum but I could not find a solution for my issue (most of the time the issue seemed to be network related)
Please let me know if you need more debug info.
Thank you.