Hi,
ive installed the newest Version of OMV on my HP N36L Microserver. Installed the image on the 250gb disk that was included. After that i created a mirror of two 1tb disks and activated the cifs/smb and configured the permissions.
I use the onboard network card in the microserver.the file system for the mirror is ext4. When i start a copy to the server it starts with 70-80mb/s but then it decreases and decreases... Now after 10 minutes i have 7,8mb/s and it seems it will decrease to zero.
When i connect with putty and type in ethtool eth0 it says:
Code
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
Link detected: yes
Alles anzeigen
It seems that it detects the gigabit card. Can anyone help me?
Mfg Ironcurtain