Flash memory setup

I am trying to edit the Flash memory setup per the instructions.

After the UUID= hex code there is no /ext4 which the example and instructions shows

There is no line with "none swap sw 0 0 either

Should I just add the /ext4 noatime,nodiratime,errors=remount-ro 0 1 ?

Since there is no line about swap I guess I don't have to comment it out either ?

Rich Prim

Its a Raspberrypi 2 computer running the 2.0.15 version of Openmediavault
Now that i read the code above the UUID= lines maybe its already setup?

proc /proc proc defaults 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 2
/dev/mmcblk0p2 / ext4 defaults,noatime,nodiratime 0 1
# a swapfile is not a swap partition, so no using swapon|off from here on, use dphys-swapfile swap[on|off] for that
# >>> [openmediavault]
UUID=fa36508a-b3c4-4499-b30a-711dd5994225 /media/fa36508a-b3c4-4499-b30a-711dd5994225 ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl 0 2
UUID=d935b8d5-c0f3-44a8-9852-ee15e210c98c /media/d935b8d5-c0f3-44a8-9852-ee15e210c98c ext4 defaults,nofail,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl 0 2
# <<< [openmediavault]

Ok and thank you.
When I opened Flash memory setup it indicated you needed to modify it, that's what confused me.

Rich Prim