OMV-SENSORS - modprobe: FATAL: Module nct7904 not found.

coretemp-isa-0001
Adapter: ISA adapter
Physical id 1:  +35.0°C  (high = +76.0°C, crit = +86.0°C)
Core 0:         +32.0°C  (high = +76.0°C, crit = +86.0°C)
Core 1:         +30.0°C  (high = +76.0°C, crit = +86.0°C)
Core 2:         +30.0°C  (high = +76.0°C, crit = +86.0°C)
Core 3:         +30.0°C  (high = +76.0°C, crit = +86.0°C)
Core 4:         +31.0°C  (high = +76.0°C, crit = +86.0°C)
Core 8:         +36.0°C  (high = +76.0°C, crit = +86.0°C)
Core 9:         +30.0°C  (high = +76.0°C, crit = +86.0°C)
Core 10:        +34.0°C  (high = +76.0°C, crit = +86.0°C)
Core 11:        +34.0°C  (high = +76.0°C, crit = +86.0°C)
Core 12:        +34.0°C  (high = +76.0°C, crit = +86.0°C)


i350bb-pci-0500
Adapter: PCI adapter
loc1:         +56.0°C  (high = +120.0°C, crit = +110.0°C)


nct7904-i2c-0-2d
Adapter: SMBus I801 adapter at 9000
in1:          +1.00 V
in2:          +2.05 V
in3:          +1.97 V
in4:          +1.26 V
in5:          +1.26 V
in6:          +0.60 V
in7:          +1.84 V
in8:          +0.62 V
in9:          +0.73 V
in10:         +0.77 V
in11:         +1.49 V
in12:         +1.51 V
in13:         +1.50 V
in14:         +1.50 V
in15:         +3.34 V
in16:         +3.23 V
in20:         +3.38 V
fan1:           0 RPM
fan2:         928 RPM
fan3:        1662 RPM
fan4:           0 RPM
fan5:        1681 RPM
fan6:           0 RPM
fan7:           0 RPM
fan8:        1036 RPM
temp1:        +40.9°C
temp2:         +0.0°C
temp3:         +0.0°C


coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +34.0°C  (high = +76.0°C, crit = +86.0°C)
Core 0:         +29.0°C  (high = +76.0°C, crit = +86.0°C)
Core 1:         +31.0°C  (high = +76.0°C, crit = +86.0°C)
Core 2:         +30.0°C  (high = +76.0°C, crit = +86.0°C)
Core 3:         +32.0°C  (high = +76.0°C, crit = +86.0°C)
Core 4:         +29.0°C  (high = +76.0°C, crit = +86.0°C)
Core 8:         +34.0°C  (high = +76.0°C, crit = +86.0°C)
Core 9:         +29.0°C  (high = +76.0°C, crit = +86.0°C)
Core 10:        +35.0°C  (high = +76.0°C, crit = +86.0°C)
Core 11:        +27.0°C  (high = +76.0°C, crit = +86.0°C)
Core 12:        +29.0°C  (high = +76.0°C, crit = +86.0°C)

Error #0:
exception 'OMV\ExecException' with message 'Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; omv-mkconf sensors balls 2>&1' with exit code '1': cat: write error: Broken pipe
# sensors-detect revision $Revision$
# System: Supermicro X9DRH-7TF/7F/iTF/iF [1234567890]
# Kernel: 4.9.0-0.bpo.3-amd64 x86_64
# Processor: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz (6/62/4)


Running in automatic mode, default answers to all questions
are assumed.


Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No


Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No


Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Found `IPMI BMC KCS' at 0xca2...                            Success!
    (confidence 8, driver `to-be-written')


Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No


Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Patsburg (PCH)
Module i2c-dev loaded successfully.


Next adapter: SMBus I801 adapter at 9000 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x2d
Handled by driver `nct7904' (already loaded), chip type `nct7904'
Client found at address 0x4a
Probing for `National Semiconductor LM75'...                No
Probing for `National Semiconductor LM75A'...               No
Probing for `Dallas Semiconductor DS75'...                  No
Probing for `National Semiconductor LM77'...                No
Probing for `Analog Devices ADT7410/ADT7420'...             No
Probing for `Analog Devices ADT7411'...                     No
Probing for `Maxim MAX6642'...                              No
Probing for `Texas Instruments TMP435'...                   No
Probing for `National Semiconductor LM73'...                No
Probing for `National Semiconductor LM92'...                No
Probing for `National Semiconductor LM76'...                No
Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No
Probing for `NXP/Philips SA56004'...                        No


Next adapter: igb BB (i2c-1)
Do you want to scan it? (YES/no/selectively):


Next adapter: igb BB (i2c-2)
Do you want to scan it? (YES/no/selectively):


Next adapter: mga i2c (i2c-3)
Do you want to scan it? (yes/NO/selectively):




Now follows a summary of the probes I have just done.


Driver `nct7904':
  * Bus `SMBus I801 adapter at 9000'
    Busdriver `i2c_i801', I2C address 0x2d
    Chip `nct7904' (confidence: 6)


Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)


Driver `to-be-written':
  * ISA bus, address 0xca2
    Chip `IPMI BMC KCS' (confidence: 8)


Note: there is no driver for IPMI BMC KCS yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.


Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no):
Copy prog/init/lm_sensors.service to /lib/systemd/system
and run 'systemctl enable lm_sensors.service'
for initialization at boot time.
Unloading i2c-dev... OK
Unloading cpuid... OK
' in /usr/share/php/openmediavault/system/process.inc:175
Stack trace:
#0 /usr/share/openmediavault/engined/module/sensors.inc(33): OMV\System\Process->execute()
#1 /usr/share/openmediavault/engined/rpc/config.inc(168): OMVModuleSensors->applyConfig()
#2 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array)
#3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(124): call_user_func_array(Array, Array)
#4 /usr/share/php/openmediavault/rpc/serviceabstract.inc(150): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array)
#5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(528): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatusIx...', '/tmp/bgoutputpA...')
#6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(151): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))
#7 /usr/share/openmediavault/engined/rpc/config.inc(213): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array)
#8 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array)
#9 /usr/share/php/openmediavault/rpc/serviceabstract.inc(124): call_user_func_array(Array, Array)
#10 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array)
#11 /usr/sbin/omv-engined(536): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1)
#12 {main}