RAID6 Array needs to be manually reassembled after every reboot

  • Hi,


    I'm Running OMV 3.0.99 on a Odroid XU4 with 4 x 2TB in RAID6 through a USB3 interface (JMicron). Every time I reboot I get an email reporting a degraded array and the array fails to mount automatically. However If I do the following the array mounts without problems:
    mdadm --assemble /dev/md0 /dev/sd[abcd] --verbose --force


    Sometimes after doing this one of the drives will be missing and I have to add it manually:
    mdadm /dev/md0 --add /dev/sda


    The array is reported to be clean and runs normally after doing this. No SMART errors either.



    Any ideas?


    Thanks!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!