Es gelang mir nicht, ein RAID 5 zu erstellen. Dieser Fehler wurde schon von anderen Benutzern gemeldet. Die Maßnahme, die Laufwerke zu löschen, war nicht erfolgreich. Ich konnte dann das RAID auf der Kommandozeile mit dem Kommando mdadm fehlerfrei erzeugen. Dieses wird nun auch in OMV angezeigt. Kann ich es normal verwenden?
Probleme bei Erstellung eines RAID 5
-
- OMV 5.x
- eehmke
-
-
The action to erase the drives was unsuccessful
In what way, wiping the drives in OMV's WebUI from Storage -> Disks will erase all signatures on the drives, then they be used to create the array.
-
In what way, wiping the drives in OMV's WebUI from Storage -> Disks will erase all signatures on the drives, then they be used to create the array.
That's what I did, the drives still did not show up in the RAID settings. After I created the RAID manually, it showed up fine in the OMV webUI, and seems to work (syncing now)
What I did not mention before, these are 4 WD Blue SSD disks in a QUAD SATA HAT on a Raspberry 4b.
-
If they didn't show then there could be some residual data/signatures on those drives, whilst you can create the array from the cli you may have problems later on
-
If they didn't show then there could be some residual data/signatures on those drives, whilst you can create the array from the cli you may have problems later on
Hmm, I did delete them via the webUI and even did a
sudo dd if=/dev/zero of=/dev/sdx bs=1M count=100
on all 4 of them.
-
Hmm, I did delete them via the webUI and even did a
Are these USB drives
-
-
No they are SATA drives on the SATA NAS kit
As in a SATA Hat
-
As in a SATA Hat
Yes.
-
Yes.
Then that is why the raid cannot be configured in the GUI, the Hat's use a USB to SATA bridge, OMV does not support Raid config on USB.
-
Then that is why the raid cannot be configured in the GUI, the Hat's use a USB to SATA bridge, OMV does not support Raid config on USB.
Does that mean the RAID is not reliable?
-
Does that mean the RAID is not reliable
What's the hat attached too?
The question you should ask yourself why do I need to run a raid
-
-
geaves
Hat das Label OMV 5.x hinzugefügt.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!