Hello Community, i bought me a new Homeserver for NAS purpose and set up a clean install of OMV 1.0.21.
After the installation of the System I upgraded everything and installed the OMV-Extras. At this Point when the System was already up to date, i power connect my HDDs to set the Fileshares. And now beginn my Problem
It´s a little bit strange, i go to File Systems and found my 3 installed Disks and want to mount it.
After clicking on the mount button of /dev/sda2 device, a new drive appears as /dev/disk/by-uuid/0D32C5101881886E with status missing.
And the drive /dev/sda2 is still unmount, after a second click on mount on the /dev/sda2 device the hdd is mountet correctly but not shown in the shares volume.
With the eXtplorer i can go on my mountet partition what was correctly mountet in /media/0D32C5101881886E
Yesterday is still play a little around with OMV as First install on a USB-Flashdrive, an there was not such a behavior. Today when a decide to install on a real hdd in my Server i got this failure.
Here i got some Pictures for you:
My blkid output my fstab and LogID:
My LogID is: TniLdO3Y
/dev/sdb1: UUID="C66A82876A8273C9" TYPE="ntfs"
/dev/sdc1: UUID="4f1ea329-2ca4-42f9-a73b-a72542b15e57" TYPE="ext4"
/dev/sdc5: UUID="136a92a8-a452-4c63-abd8-93af2b219cae" TYPE="swap"
/dev/sda2: LABEL="GoFlex" UUID="0D32C5101881886E" TYPE="ntfs"
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=4f1ea329-2ca4-42f9-a73b-a72542b15e57 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=136a92a8-a452-4c63-abd8-93af2b219cae none swap sw 0 0
/dev/sdb1 /media/usb0 auto rw,user,noauto 0 0
tmpfs /tmp tmpfs defaults 0 0
# >>> [openmediavault]
/dev/disk/by-uuid/0D32C5101881886E /media/0D32C5101881886E ntfs defaults,nofail 0 2
# <<< [openmediavault]
So I hope my english was well enough to understand my problem.
Would be nice if someone could help me, and that
Greetings
Vertax