YES YES YES!!
I made it, thanks to you two!
Wiped the disk totally (Secure in OMV4)
I started it last night and when I tried to make a file system and mount it = Success!!
Maybe its the only way to do it (when ZFS-code is on the disk)
Thanks all of you and especially @geaves.
You pointed the right way!
root@openmediavault:~# wipefs -n /dev/sdb
offset type
----------------------------------------------------------------
0x200 gpt [partition table]
0xe8e0d3f000 zfs_member [filesystem]Have you used these drives with ZFS, maybe when using them with another NAS Software?
For a long time ago I used the disk with a synology DS211j.
But it works in OMV3
Vendor
N/A
Is that a problem?
Tried Safari, MS edge, Chrome on different devices. Still the same.
BUT:
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
dirmngr
Suggested packages:
dbus-user-session libpam-systemd pinentry-gnome3 tor
Recommended packages:
gnupg
The following NEW packages will be installed:
dirmngr openmediavault-omvextrasorg
0 upgraded, 2 newly installed, 0 to remove and 107 not upgraded.
Need to get 597 kB/672 kB of archives.
After this operation, 1591 kB of additional disk space will be used.
Get:1 file:/var/cache/openmediavault/archives openmediavault-omvextrasorg 4.1.13 [75.2 kB]
Get:2 http://ftp.se.debian.org/debian stretch/main amd64 dirmngr amd64 2.1.18-8~deb9u3 [597 kB]
Fetched 597 kB in 0s (3744 kB/s)
Selecting previously unselected package dirmngr.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 39370 files and directories currently installed.)
Preparing to unpack .../dirmngr_2.1.18-8~deb9u3_amd64.deb ...
Unpacking dirmngr (2.1.18-8~deb9u3) ...
Selecting previously unselected package openmediavault-omvextrasorg.
Preparing to unpack .../openmediavault-omvextrasorg_latest_all4-2.deb ...
Unpacking openmediavault-omvextrasorg (4.1.13) ...
Processing triggers for openmediavault (4.1.3-1) ...
Restarting engine daemon ...
Setting up dirmngr (2.1.18-8~deb9u3) ...
Setting up openmediavault-omvextrasorg (4.1.13) ...
Updating configuration database ...
Initialize configuration
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.14.0-0.bpo.3-amd64
Found initrd image: /boot/initrd.img-4.14.0-0.bpo.3-amd64
done
Processing triggers for openmediavault (4.1.3-1) ...
Updating locale files ...
Updating file permissions ...
Purging internal cache ...
Restarting engine daemon ...
Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f7bb45438c8>
Traceback (most recent call last):
File "/usr/lib/python3.5/weakref.py", line 117, in remove
TypeError: 'NoneType' object is not callable
Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0x7f7bb45438c8>
Traceback (most recent call last):
File "/usr/lib/python3.5/weakref.py", line 117, in remove
TypeError: 'NoneType' object is not callable
Done ...I got some errors when I installed osv-extras on the last OMV-install attempt
Alles anzeigenMy wife loves computers as well
What I would do if this was me, the system boots, shutdown, leave the boot drive in and one drive only. Install OMV-Extras and fully update the system, if you have done that -> great.
Ok backtrack, I'm a bit confused by this -> I can see the rest of the disks under storage -> disc. But I can make any file system on the other discs. OMV format the disk and says success, but the disc disappear in OMV afterwards.
Boot with 1 drive installed, Storage -> Disks select the disk and click wipe, I usually do the short option.
File Systems -> Create, select the drive , give a label and select your file system, suggest ext4
Does the drive still not display under File Systems once completed?
Thankfully she loves me anyway
She likes computers that work... and backup pictures of our children.
Too bad, I have done the update.
The last attempt I've done, wiped the disc - mount with name TEST - EXT4 (tried EXT3 to). Process all the way to the end. Success, and file system dissapire.
Maybe I explained it wrong for you in the last post.
I can see the disc under storage, but can't see file system.
Thanks for your help!!
Alles anzeigen1. That would imply that no drivers are being loaded in D9 but they are in D8 OS's usually go forward not back.
2. What are you using for OMV's boot device? Are the drives visible under Storage -> Disks
3. According to the manual there are three options for the sata controller;
- AHCI (default)
- IDE
- Raid
The default should be the one you use, have you attached a monitor to check the boot process on screen as this will usually give information if the drives are being detected.
Thanks for your participation!
1. Can I use drivers for Debian 8 to debian 9?
2. Traditional SATA HDD on port 1. I can see the rest of the disks under storage -> disc. But I can make any file system on the other discs. OMV format the disk and says success, but the disc disappear in OMV afterwards.
3. Yes AHCI is what I have used. Tried every option.
Right now: I have the server in the living room with keyboard and monitor (my wife are so happy 
)
I can see all the discs in BIOS/UEFI, and in OMV.
Do you think a SATA controller card would solve the problem?
Hi!
(Specs in the bottom of the post)
I have run OMV3 on my server for a while. When OMV4 was released I tried to upgrade but I couldn't mount the drives for storage.
Then I made a choice and went back to omv3.
Server works with Debian 8 not 9.
For a few days ago I decided to wipe the discs and start over.
Installed OMV4 - works perfect but I couldn't mount the drives (again). Tried to reinstall OMV4 but it still the same problem.
Searched here and on google but I can't find any solution for this.
Somewhere I read something about fake raid, but I couldn't mange to get it work.
Is the sata controller the problem?
I have tried:
SATA, RAID in BIOS - 
RAID0 on sparate discs -
Make the discs hot swapable -
I'm out of ideas and google searches.
What could I do?
Buy a new SATA controller card? Would it help?
I appreciate every answer that can help me out.
My final vision: 
OMV4
Docker with:
Domoticz (or openHAB)
Grafana
InfluxDB
MagicMirror
Plex
Spec:
CPU: Celeron G1820
Mobo D3219-B11 with intel C226 chipset
RAM: 8 Gb
6x SATA (4x RAID)
See the doc (right column)
https://dustinweb.azureedge.ne…46/primergy-tx1310-m1.pdf
Alles anzeigenHi everyone,
I've recently decided to upgrade from OMV 3 to OMV 4, update went well and I didn't get any plugin issues since I don't have any.
After the upgrade I was unable to mount two of my filesystems on the NAS, both are ext4.
I can see the two disks in the Disks menu, but in the File Systems menu they were in "Missing" Status.
Firstly I tried to format one of the two drives, hoping that by creating a fresh partiton OMV would've automatically mounted it as well, with no success.
Then I verified that using SSH I was able to mount the drives by usingBashmount -t ext4 ...Other things that I tried are:
- Remove all the references to these filesystems (and shared smb folders) from /etc/openmediavault/config.xml
- Perform a fresh install of openmediavault by using apt-get purge openmediavault && apt-get install openmediavault and using the first setup tool to configure a fresh install.
I am running out of ideas about how I could resolve this issue. Any suggestions?
Hi!
Did you solve the mounting problem?
I got the same problem yesterday.
Is your file system ext4 too?
