wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/fix5to6upgrade | sudo bash
Thanks!
403 Error still there after reboot
See below attachment
wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/fix5to6upgrade | sudo bash
Thanks!
403 Error still there after reboot
See below attachment
Thanks!
Could you please elaborate?
Is there a specific command I need to run?
Or could you please provide the link with detailed steps...
Appreciate your support!
root@openmediavault:~# dpkg -l | grep openm
rc openmediavault 5.6.26-1 all openmediavault - The open network attached storage solution
rF openmediavault-flashmemory 5.0.9 all folder2ram plugin for OpenMediaVault
ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
rH openmediavault-omvextrasorg 5.6.6 all OMV-Extras.org Package Repositories for OpenMediaVault
rc openmediavault-resetperms 5.0 all Reset Permissions
rc openmediavault-shellinabox 3.4 all Web-based SSH client.
See below :
root@openmediavault:~# apt-get install --reinstall openmediavault
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
libpam-modules : PreDepends: libpam-modules-bin (= 1.3.1-5) but 1.4.0-9+deb11u1 is to be installed
openmediavault : Depends: acl but it is not going to be installed
Depends: ifenslave but it is not going to be installed
Depends: resolvconf
Depends: acpid but it is not going to be installed
Depends: libjavascript-minifier-xs-perl but it is not going to be installed
Depends: pm-utils but it is not going to be installed
Depends: ntp but it is not going to be installed
openmediavault-flashmemory : Depends: openmediavault (>= 5.0) but 4.1.36-1 is to be installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
Alles anzeigen
root@openmediavault:~# apt --fix-broken install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following package was automatically installed and is no longer required:
fdisk
Use 'apt autoremove' to remove it.
The following additional packages will be installed:
libpam-modules
The following packages will be REMOVED:
openmediavault-flashmemory openmediavault-omvextrasorg
The following packages will be upgraded:
libpam-modules
1 upgraded, 0 newly installed, 2 to remove and 333 not upgraded.
2 not fully installed or removed.
Need to get 0 B/326 kB of archives.
After this operation, 800 kB disk space will be freed.
Do you want to continue? [Y/n] y
Preconfiguring packages ...
(Reading database ... 63742 files and directories currently installed.)
Removing openmediavault-flashmemory (5.0.9) ...
/var/lib/dpkg/info/openmediavault-flashmemory.prerm: 6: .: Can't open /usr/share/openmediavault/scripts/helper-functions
dpkg: error processing package openmediavault-flashmemory (--remove):
installed openmediavault-flashmemory package pre-removal script subprocess returned error exit status 127
/var/lib/dpkg/info/openmediavault-flashmemory.postinst: 6: .: Can't open /usr/share/openmediavault/scripts/helper-functions
dpkg: error while cleaning up:
installed openmediavault-flashmemory package post-installation script subprocess returned error exit status 127
Removing openmediavault-omvextrasorg (5.6.6) ...
/var/lib/dpkg/info/openmediavault-omvextrasorg.postrm: 22: .: Can't open /usr/share/openmediavault/scripts/helper-functions
dpkg: error processing package openmediavault-omvextrasorg (--remove):
installed openmediavault-omvextrasorg package post-removal script subprocess returned error exit status 127
Errors were encountered while processing:
openmediavault-flashmemory
openmediavault-omvextrasorg
E: Sub-process /usr/bin/dpkg returned an error code (1)
Alles anzeigen
I did follow all the steps and got a message that upgrade was successful. I noticed the upgrade went very fast....
However when rebooting, I figured out that I was still on OMV5.
Then I saw lots of upgrades to do, which I did, then when I rebooted I got the 403 Forbidden nginx
Am I able to recover this?
Thanks
I have done a reboot and my OMV interface is no longer working...
I am getting 403 Forbidden nginx
Loaded sudo omv-salt stage run deploy on Putty and getting : sudo: omv-salt: command not found
I think OMV6 and OMV5 got mixed...
Docker and Portainer are working though
What do you recommend?
Thanks!
Hi All,
I am a beginner in this world so I would appreciate your patience with me
I did several upgrades from the OMV5 portal and got this message after rebooting
I am able to login into Portainer though
Thanks for your help!
Hi Guys,
Trying to upgrade to OMV6 and loaded sudo omv-salt stage run deploy.
It failed , see attachment
Any thoughts before I move to next step safely?
Thanks!!
I tried everything...despite I changed the DHCP server on my router settings to 192.168.0.24 still displaying 192.168.0.254
Honestly I am lost...would love to have this working...
what you need for me to make this working?
thx
Here my stack
version: "2"
services:
pihole:
image: pihole/pihole:latest
ports:
- "53:53/tcp"
- "53:53/udp"
- "67:67/udp"
- "80:80/tcp"
- "443:443/tcp"
environment:
TZ: 'Canada/Eastern'
WEBPASSWORD: 'password'
ServerIP: '192.168.0.24'
volumes:
- '/srv/dev-disk-by-id-ata-ST31000528AS_5VP8RK5N-part3/Config/Pihole/etc-pihole/:/etc/pihole/'
- '/srv/dev-disk-by-id-ata-ST31000528AS_5VP8RK5N-part3/Config/Pihole/etc-dnsmasq.d/:/etc/dnsmasq.d/'
dns:
- 127.0.0.1
- 8.8.8.8
cap_add:
- NET_ADMIN
restart: unless-stopped
Alles anzeigen
Pihole dashboard
here the requested info :
IP DHCP Server : 192.168.0.24
IP Gateway : 192.168.0.254
PC IP : 192.168.0.167
NAS IP : 192.168.0.24
Pihole : 192.168.0.24/admin
See attached
my pihole has the same ip address of omv...could not put the same ip for primary and secondary...
Should I change pihole ip?
let me know
Thanks for your response!
I did setup my router as per below :
Primary DNS : IP address of my server
Secondary DNS : Blank (was 8.8.8.8)
MTU : 1500
MAC Address Clone: Blank
Let me know!
Hey Guys,
I did installed Pihole and everything went smoothly...I am not seeing any query blocked despite I configured the router with my server IP under DHCP...
Any idea why it is not doing its job?
Thanks!!
Absolutely right!
Thanks guys!
Hello,
I tried to remove var/lib/docker with sudo rm -r var/lib/docker but I got the following message :
Weird as I did used the cp command...I tried navigating on var folder and I did not find the docker folder....
Any thoughts?
Thanks
Thanks All!
I used the below stack :
version: "2"
services:
watchtower:
container_name: watchtower
image: containrrr/watchtower
volumes:
- /var/run/docker.sock:/var/run/docker.sock
environment:
- WATCHTOWER_CLEANUP=true
- WATCHTOWER_POLL_INTERVAL=86400 #check for updates once per day
restart: unless-stopped
Hey Guys,
Is there something we can install to automatically remove unused images once the container has been updated by watchtower?
Thanks for your inputs!
cheers