Dashboard
Ungelesene Themen
-
- Thema
- Antworten
- Letzte Antwort
-
-
-
-
- Antworten
- 13
- Zugriffe
- 161
-
-
-
-
-
- Antworten
- 1
- Zugriffe
- 52
-
-
-
-
-
- Antworten
- 0
- Zugriffe
- 13
-
-
-
-
-
- Antworten
- 27
- Zugriffe
- 505
-
-
-
-
-
- Antworten
- 43
- Zugriffe
- 591
-
Letzte Aktivitäten
-
ryecoaaron
Hat eine Antwort im Thema Errors Encounterd Installing Proxmox Kernel 6.14 / Failed to install Proxmox Kernel 6.14 verfasst.Beitragopenmediavault-zfs 8.0.3 in the repo. -
ryecoaaron
Hat eine Antwort im Thema Errors Encounterd Installing Proxmox Kernel 6.14 / Failed to install Proxmox Kernel 6.14 verfasst.Beitrag[…]
If you boot back into a debian kernel and click the Fix packages button, it should fix it.
[…]
the dkms provider has more than just zfs-dkms as a dependency. Your scenario is the only one I didn't test. Most of the time, people are installing the zfs… -
hmoff
Hat eine Antwort im Thema ZFS question on OMV 8.0.4 verfasst.BeitragI would start by isolating the bottleneck to the network (using iperf3) or the disks or the file system (use fio). -
hmoff
Hat eine Antwort im Thema Errors Encounterd Installing Proxmox Kernel 6.14 / Failed to install Proxmox Kernel 6.14 verfasst.Beitrag[…]
The new changes (omv-zfs-provider-dkms etc) caused my system to install the Proxmox kernel even though I already had everything working with zfs-dkms and the standard Debian kernel.
This is because of your new dependency on "omv-zfs-provider-pve |… -
HomeAdmin
Hat das Thema OMV Regen says ERROR: Package openmediavault is in bad condition: gestartet.ThemaThis happened tonight, first time after the big update.
System appears to be OK.
Help please.
Thanks
Dave
sudo omv-regen backup
>>>
>>>>>> <<< Backup dated 2026-01-12 00:53:12 >>>
>>>
>>> Server: mayimnas
[2026-01-12… -
DickyDooDah
Hat eine Antwort im Thema Opening ports on router from OMV verfasst.Beitrag[…]
I have the same issue with one of the proposed remote servers I'm intending on setting up. However my router allows me to change the IP range from the common 192.168.1.0/24 to whatever I like, I just have to choose something that's not used by ISPs. -
ml3456
Hat eine Antwort im ThemaBeitrag- OMV 8.x
I did when I was trying to install. I can try adding theses later this week but server busy now. I’ll let you now. Thanks!! -
BernH
Hat eine Antwort im Thema Opening ports on router from OMV verfasst.Beitrag[…]
Wireguard can do the same thing with the "Allowed IP's" directive. I can access the modem/router (or other things) directly over it, but in my case, my ISP's router/modem uses the same ip range/subnet as my buddy's (same ISP), and if I have my… -
DickyDooDah
Hat eine Antwort im Thema Opening ports on router from OMV verfasst.BeitragBernH I thought you might like to know that I tried your suggestion of using Firefox and It did do exactly what I was trying to achieve. However whilst messing about with Tailscale I discovered their Subnet Routers. It allows me to directly browse to… -
skullkidrae
Hat eine Antwort im ThemaBeitrag- OMV 8.x
[…]
out of cuiosity. why is it showing as end0 not eth0?
