Hello,
i created this thread for questions and discussion arround the tvheadend guide.
regards
firsttris
Hello,
i created this thread for questions and discussion arround the tvheadend guide.
regards
firsttris
Okay, sorry
Has anybody installed tvheadend 4.x on OMV? Does it work flawlessly?
thought wheezy isnt supported?
Yes it works in OMV. It is easy to compile (first program I ever compiled - see chris's thread and mine).
However time shift with kodi is still not working very good (picture hangs or stutters, ac3 audio gets out if sync).
I ruled out my hardware - time shift is Samsung evo ssd, network is GBE with layer 2 switch and port priority for htsp protocol.
Htpc with kodi is a AMD A10 and problem are with windows and Kodi under Linux.
I have tried 4.0.5 and 4.1 git
Timeshift still not working?
I have timeshift working flawlessly on TVH 3.9.x.
Did you install TVH 4.x new, or updated from 3.x ?
I think I just updated from 3.9 (where I started using TVH) to 4.1 and then quick back to more "stable" 4.0.5.
It can also be the kodi plugin which causes the issues, I just can't tell.
I am about to try 4.1 again to see if that makes a difference.
Timeshift still not working?
I have timeshift working flawlessly on TVH 3.9.x.
Did you install TVH 4.x new, or updated from 3.x ?
With which program are u using tvheadend?
I'm using Kodi too!
OpenELEC only (1x RasPi1, 1x Raspi2, 1x HTPC Intel J1900)
But, to be honest, never tried Timeshift on RasPis, I'm using Timeshift on HTPC only (Living Room).
Which Kodi version and PVR.HTS version are you using?
It's OpenELEC 5.0.8, I think that has to be Kodi 14.2
What do you mean with PVR-HTS ?
I'm using the TVHeadend-Client which is integrated in OpenELEC.
TVHeadend on my Server is V 3.9.2827
Ah, ok. I use Kodibuntu and Windows where the plugin is called pvr.hts.
For me timeshift is not working with 3.9, 4.0.5 and 4.1 - picture stutters, freezes just not bearable.
I have no idea what the problem is. I will try VDR tomorrow.
EDIT:
On my Notebook running Windows todays nightly using plugin version 2.1.16 seems to be much better. Sadly that version is not available for Linux to test it.
I can remember that I had similar problems as I started with PVR and Live-TV, but sadly I dont remember when and why it runs flawlessly.
What are your settings for timeshift? On what folder? What disk? (HDD or SSD?)
I'm using the System-SSD for buffering Timeshift.
Is "On-Demand" enabled? (disabled is much better).
Time shift is set to "permanent" and it is on a SSD.
Thats weird...
My settings:
Enabled [X]
On Demand [ ]
Storage Path: /home/hts/timeshift (On SSD)
Max Period: 0 | unlimited time [x]
Max Size (MB): 20000 | unlimited size [ ]
Max RAM Size (MB): 0 | Use only RAM [ ]
Works great! Sorry, I have no more ideas at the moment.
How did you install V 4.0.5 ?
I'm interested in testing
I just tried VDR - so far under "heavy timeshifting" absolutely no issues.
Hm, maybe a Bug in TVH 4.x ?
Did you had a look in TVH-Log while Timeshifting?
Is there a folder "buffer" in the folder you set up for timeshift?
Is TVH writing in this folder while you're watching TV?
Hm, maybe a Bug in TVH 4.x ?
Did you had a look in TVH-Log while Timeshifting?
Is there a folder "buffer" in the folder you set up for timeshift?
Is TVH writing in this folder while you're watching TV?
Yes there was a "buffer" in my TS folder and the log was free of errors even in debug mode and the drive filled up.
It is not that TS was completely not working, I could go back 30 minutes or so. Just when it started playing at the point where it should there were picture hangs, judder/stutter out of sync and so on.
Sometimes there was no problem for an hour or so, sometimes the issues were there from the beginning. And I have tried about 6 or so builds of TVH....somehow impossible to debug
Besides that TVH was nice, because of the web interface easy to set up on a headless machine unlike vdr where I needed to dig in config files.
found it
Hello,
I have a little Problem with the Installation.
I used this guide:
Tvheadend Setup and Config
Installation is fine, but I have no browser-backend? Start/restart doesn't help.
Any solution?
Error in syslog ?
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!