Hello,
recently, i made a NAS with OMV 2.2, 4x2TB and a SSD on my HP microserv gen8. It works fine.
After loading it and getting an almost full storage, i decided to replace each 2TB hdd by 4TB hdd, one by one, step by step.
1st, i shutdown, then get out the 1st 2TB HDD, then replace by a 4TB HDD, then start, then add physical disk, regenerate and after 4 steps, i get a new 5,5TB volume with 4x4TB array.
i would like to grow the volume to maximum capacity. I can not to this capacity extension
what i did:
i go to Raid managment module, select the relevant volume, and then i click on Grow button. but nothing appears.
Code
Release: 2.2.13
Codename: Stone burner
----
Raid Level : raid5
Array Size : 5860148736 (5588.67 GiB 6000.79 GB)
Used Dev Size : 1953382912 (1862.89 GiB 2000.26 GB)
Raid Devices : 4
Total Devices : 4
Persistence : Superblock is persistent
Update Time : Thu Feb 2 19:09:52 2017
State : clean
Active Devices : 4
Working Devices : 4
Failed Devices : 0
Spare Devices : 0
Alles anzeigen
What do i have to do to get a new volume, extended to a 4x4TB array
thanks.
Genna