Docker-Anfänger-Problem mit Konfiguration des Netzwerkes -> Docker beginner problem with network configuration
-
-
Configuration not successful, any errors:
When you deleted the other container, you need to delete anything you set up with that container, the container, the image, networking, and any config files.
The config will be where you have pointed the container config too.
The error is probably related to leftover config files.
-
Why are you setting it up with a macvlan? as the webgui port is 8080 which would imply to use host in the networking option.
-
Yeah, I guess I'm a little too impatient.
The problems start with the fact that I don't know what kind of processor it is and what kind of operating system the Armbian is (64- or 32-bit).
Code
Alles anzeigenlogin as: root root@192.168.115.130's password: ____ ____ _ | __ ) __ _ _ __ __ _ _ __ __ _ | _ \(_) | _ \ / _` | '_ \ / _` | '_ \ / _` | | |_) | | | |_) | (_| | | | | (_| | | | | (_| | | __/| | |____/ \__,_|_| |_|\__,_|_| |_|\__,_| |_| |_| Welcome to ARMBIAN 5.70 stable Debian GNU/Linux 9 (stretch) 4.19.13-sunxi System load: 4.47 3.44 1.63 Up time: 6 min Memory usage: 22 % of 998MB IP: 192.168.115.130 CPU temp: 45°C Usage of /: 98% of 7.4G storage/: 63% of 466G [ General system configuration (beta): armbian-config ] Last login: Mon Jan 14 20:19:06 2019 from 192.168.115.3 root@bananapi:~# cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 50.52 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 processor : 1 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 50.52 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 Hardware : Allwinner sun7i (A20) Family Revision : 0000 Serial : 165166ca0802ded3 root@bananapi:~#
Which Kodi Docker image do I need now? 32 bit or 64 bit?It's all very hard for me, excuse me.
The Name from the Machine is BananaPi-M1 . . . or BananaPi A20 . . . am a beginner.
-
Yeah, I guess I'm a little too impatient.
Anything you run in Docker needs to be an arm version due to the cpu on the BananaPi, so for Kodi you'll need the armhf version.
-
lsioarmhf/kodi-headless-aarch64 or lsioarmhf/kodi-headless ? I'am not shure ...
-
lsioarmhf/kodi-headless
This one.
The Parameters indicate that the network should be host as the webgui is 8080, but these have to be set up, so to open Kodi in a browser it would be http://<ip address of omv>:8080
- -p 8080 - webui port
- -p 9090 - websockets port
- -p 9777/udp - esall interface port
- -v /config/.kodi - path for kodi configuration files
- -e PGID for GroupID - see below for explanation
- -e PUID for UserID - see below for explanation
- -e TZ - for timezone information eg Europe/London, etc
-
I'm still doing something wrong.
The docker container shows "running" for about 1 second, then "dead" and after clicking on "Start" nothing happens...
I now try the bridge mode ...
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!