SMART details for USB drive

ianch99 · 3. März 2014

I have just noticed that the SMART details for my external USB disk are no longer available in the OMV GUI. You get this error when trying to display the Information:

Zitat

Failed to get S.M.A.R.T. self-test logs (device=/dev/sdf)
Error #6000: exception 'OMVException' with message 'Failed to get S.M.A.R.T. self-test logs (device=/dev/sdf)' in /usr/share/openmediavault/engined/rpc/smart.inc:359
Stack trace:
#0 [internal function]: OMVRpcServiceSmart->getSelfTestLogs(Array, Array)
#1 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
#2 /usr/share/php/openmediavault/rpc.inc(62): OMVRpcServiceAbstract->callMethod('getSelfTestLogs', Array, Array)
#3 /usr/sbin/omv-engined(495): OMVRpc::exec('Smart', 'getSelfTestLogs', Array, Array, 1)
#4 {main}

Alles anzeigen

I am on the latest 0.5.37 version but am unsure when this stopped working.

I checked the drive is still ok and I can see the SMART data from the command line:

Zitat

ianch-hp ~: sudo smartctl -d sat -H /dev/sdf
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022 061 039 045 Old_age Always In_the_past 39 (0 240 56 24)

Alles anzeigen

Anyone else seen this?

0rtega · 3. März 2014

On my system I have only these little anomalies on SMART attributes:

My 2 Western Digital Hard Drives connected with Sata interface

My Hitachi Hard Drive connected with USB interface

votdev · 3. März 2014

Zitat von "ianch99"

I have just noticed that the SMART details for my external USB disk are no longer available in the OMV GUI. You get this error when trying to display the Information:

I am on the latest 0.5.37 version but am unsure when this stopped working.

I checked the drive is still ok and I can see the SMART data from the command line:

Anyone else seen this?

Alles anzeigen

Can you please test the following command and post it's output:

# smartctl -x -d sat /dev/sdf

ianch99 · 3. März 2014

here you go:

Code

ianch-hp ~: sudo smartctl -x -d sat /dev/sdf
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net


=== START OF INFORMATION SECTION ===
Device Model:     ST3000DM001-1E6166
Serial Number:    W1F39PN9
Firmware Version: CC45
User Capacity:    3,000,592,982,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Mar  3 09:52:14 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.


General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 584) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3081) SCT Status supported.


SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   114   099   006    Pre-fail  Always       -       75291704
  3 Spin_Up_Time            0x0003   091   091   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       598
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   060   057   030    Pre-fail  Always       -       8592193995
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3970
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       18
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       21475164165
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   066   039   045    Old_age   Always   In_the_past 34 (0 240 56 24)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       17
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1920
194 Temperature_Celsius     0x0022   034   061   000    Old_age   Always       -       34 (Lifetime Min/Max 0/32768)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       131889855725714
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       4029337992
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       785292923


General Purpose Logging (GPL) feature set supported
General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    5 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    5 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP    Log at address 0x21 has    1 sectors [Write stream error log]
GP    Log at address 0x22 has    1 sectors [Read stream error log]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xa1 has   20 sectors [Device vendor specific log]
GP    Log at address 0xa2 has 4496 sectors [Device vendor specific log]
GP/S  Log at address 0xa8 has  129 sectors [Device vendor specific log]
GP/S  Log at address 0xa9 has    1 sectors [Device vendor specific log]
GP    Log at address 0xab has    1 sectors [Device vendor specific log]
GP    Log at address 0xb0 has 5176 sectors [Device vendor specific log]
GP    Log at address 0xbd has  512 sectors [Device vendor specific log]
GP    Log at address 0xbe has 65535 sectors [Device vendor specific log]
GP    Log at address 0xbf has 65535 sectors [Device vendor specific log]
GP/S  Log at address 0xc0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc1 has   10 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]


SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged


SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3820         -
# 2  Short offline       Completed without error       00%      3652         -
# 3  Short offline       Completed without error       00%      3484         -
# 4  Short offline       Completed without error       00%      3320         -
# 5  Short offline       Completed without error       00%      3152         -
# 6  Short offline       Completed without error       00%      2969         -
# 7  Short offline       Completed without error       00%      2816         -
# 8  Short offline       Completed without error       00%      2652         -
# 9  Short offline       Completed without error       00%      2484         -
#10  Short offline       Completed without error       00%      2346         -
#11  Short offline       Completed without error       00%      2177         -
#12  Short offline       Completed without error       00%      2010         -
#13  Short offline       Completed without error       00%      1842         -
#14  Short offline       Completed without error       00%      1674         -
#15  Short offline       Completed without error       00%      1506         -
#16  Short offline       Completed without error       00%      1401         -
#17  Short offline       Completed without error       00%      1169         -
#18  Short offline       Completed without error       00%      1001         -
#19  Short offline       Completed without error       00%       880         -


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Warning: device does not support SCT Data Table command
Warning: device does not support SCT Error Recovery Control command
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            4  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

Alles anzeigen

votdev · 3. März 2014

Thanks. I will improve error logging in the next version to identify your problem. Right at the moment i do not have an idea what is going wrong. Please open a new bugreport if the problem with 0.5.38 still exists.

ianch99 · 3. März 2014

Sure, will do. BTW, this issue is due to a recent update. Not sure which though but this feature has been working fine up until recently ..

votdev · 3. März 2014

After a quick codereview i think i've identified the problem, thus your problem should be solved in openmediavault 0.5.38.

ianch99 · 3. März 2014

Many thanks!

Jetzt mitmachen!