Do you have a mounted data drive?
microNAS with Odroid U3
-
-
Do you mean any storage data ?
In that case not yet They're connected 3 x 32Gb microsd Through USB, 1 through USB-OTG, and one directly in the motherboard (which i can't use as Storage), but they are only connected, not yet formatted nor mounted.
The only mounted fs is the EMMC flash which has 64Gb and is the root ;).Thanks!
-
Once you mount one of those, it will go away.
-
I'm happy to notify that now, the microNAS recognizes /dev/mmcblk0 to be addable to RAID5! (maybe it was because of updates or because i've formatted it's fs).
Unfortunately now, the microNAS doesn't start properly and stops booting at second ~5, after
the following output:I've waited for 6 minutes, but it doesn't proceed - 1. Should i wait more ?
Using Alt + SysRq + R and then E, terminates all tasks, but it proceeds with NET module (registered protocol family 10 and 31, note: it already initialized other protocols) and Bluetooth initialization (e.g HCI device enabled and such) ( 2. maybe something hanging those?), and goes into the login session.Logging and looking at some logs i've found some infos:
at "boot" log i've found:CodeFile system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually ... failed!
under suggested checkfs file i found the following errors:The only error i get in messages is:
smsc95xx eth0 device_set_wakeup_enable error -22 several timesShould i disable any plugin ?
May i attach any particular log ?ThanKs !!
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!