Hi Guys
This is my first post so i hope you are patient, i will write as much detail as i can.
I have a N40l server housing two of my 3x2tb drives. 2 are in raid0 and the other is seperated.
I had 1.3tb of data in the single drive and i SSH into the box and moved the data over to the Raid0 drives using the linux mv command.
My laptop turned off after four hours and only 400gb had been moved across, i kno this as thats what the gui showed. Although the data can not be seen physically on the target drive.
In a nutshell, the 400gb that 'Apparently moved' inowto be seen. it seems that it has claimed the space but no data is shown.
I have looked in /var/tmp and /tmp but nothing is there.
I basically would like to clean the raid drive so that it shows my true size.
i have other data in the raid drive so formatting isnt an option at this moment in time.
Thanks