PlexMediaServer Not Working

jms · 14. Juli 2016

Hi,
Yesterday i change ISP and so i have a new router, this one has different setting from the older so i need to change those settings on OMV to (bond interface and eth0) after this change i lost connection to OMV. Via terminal i execute omv-firtsaid and reconfigure those interface. Now my PMs does not work. The page of plex (nasip:32400/web) opens and all the others , but there wen i try change the server says that my server is unavailable.
Running PMS version (plexmediaserver_1.0.0.2261-a17e99e-debian_amd64.deb) any idea ho to solve this

tinh_x7 · 14. Juli 2016

What do you meant by 'change the server'?
Are you using static/dynamic IP ?

do this & paste here: sudo ifconfig -a

tekkb · 14. Juli 2016

Give results of these commands:
dpkg -l | grep plex

ls -la /opt

If there is no plexcodecs directory in the opt folder disable the plugin and re-enable it and then try.

jms · 14. Juli 2016

@tinh_x7 i'm using static ip but the gateway has changed, so i need tho change it on omv to

Code

bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>  mtu 1500
inet 192.168.1.192  netmask 255.255.255.0  broadcast 192.168.1.255
ether 00:1c:c4:47:31:f9  txqueuelen 0  (Ethernet)
RX packets 115207  bytes 16978232 (16.1 MiB)
RX errors 0  dropped 62653  overruns 0  frame 0
TX packets 3820  bytes 1049276 (1.0 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
inet 192.168.1.128  netmask 255.255.255.0  broadcast 192.168.1.255
ether 44:8a:5b:cb:86:69  txqueuelen 1000  (Ethernet)
RX packets 97144  bytes 34766274 (33.1 MiB)
RX errors 0  dropped 493  overruns 0  frame 0
TX packets 59509  bytes 34936844 (33.3 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


eth2: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
ether 00:1c:c4:47:31:f9  txqueuelen 1000  (Ethernet)
RX packets 53047  bytes 12272535 (11.7 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 3820  bytes 1049276 (1.0 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
device interrupt 19  memory 0xf7960000-f7980000  


eth3: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
ether 00:1c:c4:47:31:f9  txqueuelen 1000  (Ethernet)
RX packets 20705  bytes 1566695 (1.4 MiB)
RX errors 0  dropped 20705  overruns 0  frame 0
TX packets 0  bytes 0 (0.0 B)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
device interrupt 18  memory 0xf7920000-f7940000  


eth4: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
ether 00:1c:c4:47:31:f9  txqueuelen 1000  (Ethernet)
RX packets 20728  bytes 1569533 (1.4 MiB)
RX errors 0  dropped 20728  overruns 0  frame 0
TX packets 0  bytes 0 (0.0 B)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
device interrupt 17  memory 0xf7860000-f7880000  


eth5: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
ether 00:1c:c4:47:31:f9  txqueuelen 1000  (Ethernet)
RX packets 20727  bytes 1569469 (1.4 MiB)
RX errors 0  dropped 20727  overruns 0  frame 0
TX packets 0  bytes 0 (0.0 B)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
device interrupt 16  memory 0xf7820000-f7840000  


lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
inet 127.0.0.1  netmask 255.0.0.0
inet6 ::1  prefixlen 128  scopeid 0x10<host>
loop  txqueuelen 0  (Local Loopback)
RX packets 107594  bytes 24668912 (23.5 MiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 107594  bytes 24668912 (23.5 MiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Alles anzeigen

@tekkb
Here it is

Code

dpkg -l | grep plex

Code

ii  libmpc2:amd64                         0.9-4                              amd64        multiple precision complex floating-point library
ii  libmpc3:amd64                         1.0.3-1                            amd64        multiple precision complex floating-point library
ii  openmediavault-plexmediaserver        1.0.14                             all          OpenMediaVault Plex Media Server plugin
ii  plexmediaserver                       1.0.0.2261-a17e99e-debian          amd64        Plex Media Server for Linux

and

Code

ls -la /opt

Code

drwxrwxr-x  8 root        users  4096 Jun 27 18:57 .
drwxr-xr-x 25 root        root  57344 Jul 14 02:58 ..
drwxr-xr-x  6 couchpotato users  4096 Jan 24 12:13 couchpotato
drwxr-xr-x  8 headphones  users  4096 Feb 16 17:32 headphones
drwxr-xr-x 14 root        root   4096 Feb 29 00:42 letsencrypt
drwxr-xr-x  2 root        root   4096 Jan 24 13:09 nut
drwxr-xr-x 13 sickbeard   users  4096 May 26 01:08 sickbeard
drwxr-xr-x 12 root        root   4096 Feb 24 08:09 sickbeard.old

the plexmedia server folder is in /media/"some drive"

jms · 14. Juli 2016

Seems that i found the problem, the sickRage was not finding nothing so i remember tho check DNS servers and it was set to the old router IP, change it to google DNS server and now it is working i think

tekkb · 14. Juli 2016

For plex you need to upgrade to latest version of the plugin... 1.0.15

jms · 15. Juli 2016

@tekkb how do i do that, i have been some problems with the plugins

Jetzt mitmachen!