Greetings,
I'm building my first OMV server. I'm using an LSI SAS 9211-8i HBA flashed to IT mode. BIOS version is 19. I have 2 WD RED 2TB drives attached. During the installation, OMV showed at least 1 of the drives attached as an installation option. I installed to my SSD and upon rebooting, Debain/OMV throws an MPT2SAS modprobe failed error and there re no dirves available under the drives menu in OMV.
Troubleshooting to this point:
- The LSI card works fine. Ive been using it for three years and it was purchased new. I also flashed it IT mode when purchased.
- The drives are visible in the LSI BIOS and the BIOS is asccessible upon boot.
- I can boot the the server using Windows 10 and another linux distro (Rockstore wich is CentOS based) and both detect the controller/drives without issue.
I tried searching the forums and net but didn't come up with anything that gets me past the modprobe issue at bootup. All help is appreciated.
System hardware:
- MSI AM1 MB
- AMD Athlon 5150 CPU
- 4 GB RAM
- PNY 120GB SSD
- LSI 9211-8i
- 2 WD Red 2TB Drives