MACOS Final Cut Pro does not work through SMB
I found the following information https://support.apple.com/ru-ru/HT207128
Samba 4.3.4 or later
vfs objects = catia fruit streams_xattri did it
but did not work
MACOS Final Cut Pro does not work through SMB
I found the following information https://support.apple.com/ru-ru/HT207128
Samba 4.3.4 or later
vfs objects = catia fruit streams_xattri did it
but did not work
The SMB/CIFS package in Debian9/OMV4 does not support/ship the required VFS objects. You need to use Debian10/OMV5.
You can check with CLI> testparm if the Samba configuration has accepted your change.
You can check with CLI> testparm if the Samba configuration has accepted your change.
ZitatThe SMB/CIFS package in Debian9/OMV4 does not support/ship the required VFS objects. You need to use Debian10/OMV5.
are you sure?
The SMB/CIFS package in Debian9/OMV4 does not support/ship the required VFS objects. You need to use Debian10/OMV5.
are you sure?
Maybe it's included, but as you see, it does not work. With OMV5 is should definitively work. Note that it is not enough to enable the VFS objects in SMB, you also need to configure Avahi correctly. This is all done in OMV5 automatically.
Maybe it's included, but as you see, it does not work. With OMV5 is should definitively work. Note that it is not enough to enable the VFS objects in SMB, you also need to configure Avahi correctly. This is all done in OMV5 automatically.
OMV5 is stable? OMV5 support Raspberry pi4 ?
OMV5 is more or less stable. Because the whole configuration layer has been changed, there might me still some bugs for none common setting scenarios. But I think you have no choice, OMV4 will not get new features and will be replaced by OMV5 soon.
OMV5 is more or less stable. Because the whole configuration layer has been changed, there might me still some bugs for none common setting scenarios. But I think you have no choice, OMV4 will not get new features and will be replaced by OMV5 soon.
Thank you for solution!
i did install OVM5 on the Raspbian Buster Lite Kernel version:4.19 and this problem is no more! Final cut pro works fine with SMB but i have a new problem: during wakeup my MAC from sleep mode SMB drive set me next message: "Cannot complete the operation because the source object for "Seagate4tb" cannot be found."
"connect as" button is not work and double click on folder (Seagate4tb) send my error "Cannot complete the operation because the source object for "Seagate4tb" cannot be found."
why is this happening?
I'm sorry, can't help you here because i do not have Apple desktop hardware to test this. Maybe someone else can help to fix that,
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!