Morning from the UK
Just done a fresh install of OMV 5 on the NAS, previously been running OMV 3 and felt I should really clean the NAS and start a fresh as was moving all services into Docker containers. Everything has been going smoothly apart from setting up the MergeFS and this could (is?) my fault as I might of done it out of order, so to speak.
OMV is running on 256 SSD which has been partitioned into two OS and Applications then I have 3 x 2TB and 3 x 3TB Western Digital Red. The data drives are formatted as XFS.
So far I have SNAP Raid set up
All well so far, so I sync and scrubbed the SNAPRaid and then created the MergeFS using just the Data drives 01,02, 04 and 05
Here's the error message MergeFSError.txt
and the output of fstab fstab.txt
and of BLKID blikid.txt
When I try and edit the MergeFS, i get this error
Error #0:
OMV\Config\DatabaseException: Failed to execute XPath query '/config/services/unionfilesystems/filesystem[uuid='0ed06412-2810-4472-8dbd-195cda91af69']'. in /usr/share/php/openmediavault/config/database.inc:78
Stack trace:
#0 /usr/share/openmediavault/engined/rpc/unionfilesystems.inc(166): OMV\Config\Database->get('conf.service.un...', '0ed06412-2810-4...')
#1 [internal function]: OMV\Engined\Rpc\UnionFilesystems->get(Array, Array)
#2 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#3 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('get', Array, Array)
#4 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('UnionFilesystem...', 'get', Array, Array, 1)
#5 {main}
What the best course of action here?
Should I have installed OMV 4 instead?
Did I make a mistake by setting up MergeFS on a non-empty SNAPRaid drive?
Should reboot the NAS?
Any advice will be warmly received, thanks.
Kentish