I have googled this problem, checked the common issues thread, and tried to re-install 3 times with two SD cards. This is a reproducible problem.
Problem:
Networking appears to be partially broken after initial install of OMV5 on the Raspberry Pi 4.
There is no GUI
'ERR_CONNECTION_TIMED_OUT''
There is no response to pings
ping 192.168.0.24
PING 192.168.0.24 (192.168.0.24) 56(84) bytes of data.
^C
--- 192.168.0.24 ping statistics ---
11 packets transmitted, 0 received, 100% packet loss, time 28251ms
No response to SSH
$ ssh -v root@192.168.0.24
OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: Connecting to 192.168.0.24 [192.168.0.24] port 22.
debug1: connect to address 192.168.0.24 port 22: Resource temporarily unavailable
ssh: connect to host 192.168.0.24 port 22: Resource temporarily unavailable168.0.24] port 22.
The router does give out a DHCP address
Device: Raspberrypi 4 4gb
SD Card: Sandisk Ultra 32GB
OS: Raspbian buster lite (a50237c2f718bd8d806b96df5b9d2174ce8b789eda1f03434ed2213bbca6c6ff)
OMV5: Installed via the below command on 2020-01-28
wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash
To recreate.
1. Use this official guide to install OMV5 on as raspberrypi 4.
- This included all steps, paying close attention to adding the Pi user to the SSH group. I did not run `sudo raspi-config`. I ran `sudo apt update` and `sudo apt upgrade` as instructed.
2. OMV5 install command completes sucessfuly
3. Restart the Pi using `sudo reboot`
4. Waited for 5 minutes
5. No GUI, I confirmed the IP on my router, no other Pis running in the house. MAC address matched
6. No SSH access to debug. - I understand that OMV disables SSH on install and that this is a feature not a bug
Unfortunately I am running this Pi headlessly so I cannot debug it as SSH access is now disabled.