Hi all,
I've tried to create my first bonding (Ethernet and Wifi connections), and it didn't work out like it supposed to.
Therefore, I want to remove bond0 after I created bond1. Can't find a way to remove bond0.
Second, my slave wlan0 MII status is displaying 'down', which is I don't understand.
My OMV also said "No Interface Available' upon boot up, but I can access via the web and SSH fine.
I have tried the below codes, but it said 'permission denied'.
Code
ifconfig bond0 down
echo "-eth0" > /sys/class/net/bond0/bonding/slaves
echo "-wlan0" > /sys/class/net/bond0/bonding/slaves
echo "-bond0" > /sys/class/net/bonding_masters
rmmod bonding
Code
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 200
[b]Slave Interface: eth0[/b]
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 08:62:66:c7:3c:af
Slave queue ID: 0
[b]Slave Interface: wlan0[/b]
MII Status: [i][b]down[/b][/i]
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr: c0:4a:00:05:37:9f
Slave queue ID: 0
Alles anzeigen
Code
ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond1 state UP qlen 1000
link/ether 08:62:66:c7:3c:af brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq master bond1 state DOWN qlen 1000
link/ether 08:62:66:c7:3c:af brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
6: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 08:62:66:c7:3c:af brd ff:ff:ff:ff:ff:ff
inet 192.168.1.97/24 brd 192.168.1.255 scope global bond1
Alles anzeigen